Availability Of 2 inch Hitch and Cargo Carrier Compatible W/ 2021 Hyundai Kona EV

Updated 07/30/2021 | Published 07/29/2021

Products Featured in This Question

19x47 Curt Cargo Carrier for 1-1/4" and 2" Hitches - Steel - 300 lbs

(1121)

$196.34

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(52)

$91.94

Question:

I have a 2021 Hyundai Kona EV and looking for a hitch and Cargo carrier that will support my photobooth. All carriers I see have a 2 inch and the hitches that fit the Kona are 1 1/4. can you provide me what I need to allow me to haul my photobooth? Appreciate.

asked by: Joseph H

Expert Reply:

I may have an option for you, the Draw-Tite Max-Frame # DT52GR has the 2" receiver and is a confirmed to fit your 2021 Hyundai Kona Electric.

I am not sure how heavy or large your photo booth is it may work with the 19x47 Curt Cargo Carrier # C18110 which will work perfectly in the # DT52GR. Now since this carrier weighs 30lbs you will need to make sure your photobooth does not exceed 270lbs so you can stay under the 300lb rating of your hitch. You will also need to check if your Kona has the same 300 lb tongue weight capacity, if you find it is lower, then the total of the carrier and your booth would have to stay at or below that lower number.

If your photobooth is too large or heavy to fit on this carrier your only option to transport it with your Kona EV will be by using a small trailer like the Detail K2 Mighty Multi Utility Trailer - 6' Long # K2MMT4X6.

To tow this trailer with your Kona EV you will need a vehicle wiring harness # C99KR.

I included videos of the products mentioned for you to take a look at.

expert reply by: Samuel C