Parts Needed to Install Titan Disc Brake Kit and Swing-Away Actuator # T4843300
Updated 03/12/2013 | Published 03/08/2013
Products Featured in This Question
Question:
just curious if i need any extra hoses or lines to hook this system up, i am thinking about the swing away actuator as the kit says nothing about a hose for the actuator and the swing away feature.
asked by: Gary J
Expert Reply:
The Titan Disc Brake Kit you referenced, part # T4843300 includes the flex line to make the transition between the actuator and swinging portion of the trailer tongue and the stationary portion. The brake line would then transition to hard line until the axle is reached, where the second piece of flex line would make the transition to the hard line that runs along the axle. At this point, you will need two flex lines, part # T0777300, brackets, part # T0776300 and retaining clips, part # T0776400 to make the transition between the axle hard line and the brake calipers. Because the calipers can move, the flex line is needed to bridge between the calipers and the hard line at the axle.
