Replacement Trailer Jack Wheel for a RAM 2000 lb Jack

Updated 02/22/2013 | Published 02/17/2013

Question:

I bought a new Aliner that has a RAM 2000 lb trailer jack wheel. The wheel assembly is very cheap and doesnt rolll very well or change direction very well. I was wondering if you had a heavy duty wheel assembly that would fix these problems. Thanks

asked by: Bud R

Expert Reply:

I may have an option that will work for you, however, the casters that we carry were designed as replacement casters for certain manufacturers. To determine if the Bulldog Replacement 6 Inch Caster, # BDCP555, will fit on your RAM 2,000 lb jack, you will want to take a few measurements on your jack.

This caster was designed to fit 2 inch outer diameter jack tubes. Based on my research of your jack, you should have an inner tube with a 2 inch outer diameter. The next dimension that you will want to consider is the distance from the bottom of your jack tube to the center of the pin hole. This caster measures 1 inch from the center of the pin hole to the top of the metal wheel mount.

expert reply by: John H