How To Install 7-Way Connector On 2007 Ford F-250 With Factory 7-Way Cut Off
Updated 11/23/2020 | Published 11/20/2020
Products Featured in This Question
Question:
I am looking for a 7 pin trailer harness for 2007 f250. The previous owner cut the original harness so no plug. If you could point me in right direction? Thank you
asked by: Alfy M
Expert Reply:
We can definetly get you taken care of.
You will need the Tow Ready Replacement 7-Way Harness and Socket for Factory Tow Package # 20147 and the Hopkins Endurance Quick-Install 7-Way Trailer Connector # HM40940. Since your 2007 Ford F-250 had a factory tow package harness you will just need to verify the functions of the factory harness wires and use the included heat shrink butt connectors to complete the installation.
I highly recommend a circuit tester like # PTW2993 to test the function of each wire of your vehicle's cut harness and don't just match color to color to ensure your new 7-way connector will work properly.
Once you have the harness connected you can simply plug it into the back of the Hopkins 7-Way Connector # HM40940.
I included a video of the Tow Ready # 20147 being installed and a helpful wiring article for you to take a look at.
