Quick Links Needed for 10,000 lb Trailer

Question

Question:

Hi. I see you have towing safety cables rated for a 10,000 pound trailer. I am looking for just the quick links that are rated at 10,000 lbs. My cables are fine. Do you carry them? Thanks.

asked by: Jeff M

0

Expert Reply:

Sounds like you're looking for the Blue Ox 1/2" Quick Link for Safety Chains # BX229-0512. This is designed for the Blue Ox Safety Cables # BX88197 and # BX88208 which are rated for 10,000 lbs, but it will work with any other type of chain or cable as well.

expert reply by: Jon G

0

Answer 1

You can use quick connect links, but the Tow Ready #348749M aren't the best choice since they have a 5000-lbs break strength. Since you're likely using 10k chains, I recommend using the Blue Ox 1/2" Quick Link for Safety Chains…

view full answer...

Answer 2

You can use safety cables instead of chains if your trailer is under the weight rating of the cable. The safety cables are made from nylon coated steel. I do not recommend using the Curt 7500 lb rated safety cable part #C80176 because that would be…

view full answer...

Answer 3

When using D-ring adapters to flat tow your Jeep like what it sounds like you're doing, safety cables will generally just need to be attached to the vehicle's frame. What you can do is use some short cables to wrap around each frame rail and…

view full answer...

Answer 4

I definitely understand how safety chain capacities and determining exactly what chain rating you need for your trailer can be a bit confusing. To keep it as simple as possible, safety chain requirements state that the breaking strength of EACH…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 8

Hey Adam, we have just what you are looking for with the B and W fifth wheel rail kit part #BWRVK2402 which is a confirmed fit for your 2017 Ford F-250 and is the industry standard rail design which means it will fit the hitch you have. This is a…

view full answer...

Answer 9

Hey Tim, we do have other options as well that fit the 2.5 inch hitch size like with the Weigh Safe True Tow part #WS59MR which your tongue weight would work great with and comes with a shank that can do a drop of up to 6 inches. This also has a…

view full answer...

Answer 10

Hi Seth! The B&W Patriot 5th Wheel Trailer Hitch w/ Slider - Dual Jaw - 18,000 lbs #BWRVK3270 will fit any industry standard rails (also referred to as ISR) perfectly, but there are technically a few rails out there that it will not fit. Those…

view full answer...

Answer 11

Tony, that's a great question, and you're absolutely right to double-check before ordering. Yes, etrailer part #PD69RR is the Progressive Dynamics PD9345V converter charger. The PD69RR number is our internal etrailer part number, while…

view full answer...

Answer 12

Hello Sean, Thanks for writing in. For a replacement hardware kit you will want to order the Replacement Hardware Kit for Trailer Hitches #RHK. Above "ADD TO CART" you will need to put "Curt C15410" so the warehouse knows what…

view full answer...

Quick Links Needed for 10,000 lb Trailer

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching