Jack Recommendation for Trailer Frame that is 3.5 inch by 3.5 inch
Updated 04/21/2020 | Published 04/11/2020
Products Featured in This Question
Question:
What are the distances between holes? My current trailer frame is 3.5inch x 3.5. The distance between holes: Horizontal 5.5 Vertical: 4.5, 3.5, 2.5 Will plate of your jack fit frame of my trailer?
asked by: Marat B
0
Expert Reply:
The jack won't fit unfortunately since the max frame width it can fit is 3 inches but you could pretty easily go with a weld on jack like the Fulton # FXP10W0301.
expert reply by:
Jameson C
0
click to enlarge
Product Page this Question was Asked From
Fulton Boat Trailer Jack w/ 2 Wheels - Sidewind - Swivel - 12" Lift - Zinc - 1.5K
- Trailer Jack
- Boat Trailer
- Utility Trailer
- Side-Mount Jacks
- Swivel Jacks
- Marine Grade
- 1001 - 2000 lbs
- Manual Jack
- 12 Inch Lift
- Bolt-On
- With Wheel
- Fulton
more information >
Continue Researching
- Shop: Jack Mounting Bracket for Fulton Marine Jack - Weld-On
- Shop: Fulton Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 10" Lift - Zinc - 1.2K
- Q&A: Replacement Bolt-On Fulton Trailer Jack
- Q&A: Replacement Trailer Jack for Shelby Model 5764A on Boat Trailer
- Q&A: What is the Difference Between the Kodiak Disk Brake Kits K2R35DKG and K2R35DS?
- Q&A: What Is The Mounting Plate Bolt Spacing For The Dutton-Lainson Boat Trailer Jack DL22335
- Q&A: Correct Mounting Bracket Bolts for Kodiak Disc Brake Kit
- Q&A: Dimensions for Fulton Bolt-Thru Swivel Marine Jack # FXPD15L
- Q&A: Parts Needed to Convert Trailer to Surge Disc with Welded on Atwood Actuator and 3,500 lb Axles
- Article: Trailer Wiring Diagrams
- Article: How to Measure for Trailer Hitch Drop
- Article: Trailer Lighting Requirements
- Article: Trailer Jacks
- Article: Best Boat Trailer Jacks
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: How to Measure Your Trailer Wheel Bolt Pattern
Marat B.
4/20/2020
Are there any jacks in existence that would fit 3.5 x 3.5 frame except those weld on which I do not know what it is. Does it have to be physically welded to the frame?Is it that difficult to provide dimensions of the bracket on the site? It would eliminate some questions.