How Long Is Each Section of the Stromberg Carlson Extend-A-Shower Shower Curtain Rod

Question

Question:

Hello, I need to purchase one of the curtain rod holders for our home. I am in need of the dimensions of the sides and center portions for the smaller and bigger version. I want to use it with a 38 inch neo-angle shower. Thank you.

asked by: Stefanie M

0

Answer 1

The Stromberg Carlson Extend-A-Shower Shower Curtain Rod, #EXT-3542S, can be trimmed to fit your 50 inch wide space. The trimming instructions are as follows: Tools Needed: Tape measure Philips screwdriver Pipe cutter or hack saw Electric drill 3/16…

view full answer...

Answer 2

We don't have a specific shower enclosure for your 2000 Starflyte RV, but we might have a solution for you. A lot of people use a universal setup such as Stromberg Carlson Extend-A-Shower Shower Curtain Rod for RVs #EXT-3542S which is adjustable…

view full answer...

Answer 3

The distance between the mounting holes of the #EXT-3542S is 3 inches and the mounting brackets are 1 inch by 3-1/2 inches in overall size.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Yes, to run the Hot-Line LED Third Brake Trailer Light Bar w/ Reflector #328-003-6017X as a brake light only you will need the 3rd Brake Light Logic Module #PP20-702. This module will take input from both tail lights to determine when the brake light…

view full answer...

Answer 6

Hey Dan, I attached a picture that has all of the dimensions of a similar shank that comes with the Andersen Weight Distribution System part #AN28VR that you referenced. Let me know if you will have enough clearance, are you running your current…

view full answer...

Answer 7

Hey Brent, we have just the jack portion of what you are looking for with the part #LC362485 which it sounds like is exactly what you are looking for. The shipping and pricing questions I am not able to answer though but if you go through the check…

view full answer...

Answer 8

Hey there Michelle! While weight distribution systems are supposed to get the truck and trailer as level as possible, they are not complete miracle workers and won't make both 100% level in all situations. In fact, Andersen has a section of the…

view full answer...

Answer 9

Yes, the 2019 Grand Design Momentum 350G is prewired from the factory to be used with the Furrion RV Observation Camera System part #FOS43TASF. All you will need to do is plug the camera into the preinstalled bracket, sync the camera/monitor…

view full answer...

Answer 10

Yes, the MaxxAir II RV and Enclosed Trailer Roof Vent Cover #MA86JR will fit the MaxxFan Plus Roof Vent #MA00-04500K. The reason that the vent cover is so much larger is that it is more of a universal style. If you would like a more custom fit then…

view full answer...

Answer 11

Hey Pat, that is really odd that your wiper is essentially installed upside down. I wonder if the previous installer did that on purpose or did so by mistake. I would recommend installing it in the correct orientation.

view full answer...

How Long Is Each Section of the Stromberg Carlson Extend-A-Shower Shower Curtain Rod

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching