Wiring the Titan BrakeRite EHB Adapter to the Titan BrakeRite EHB Actuator

Updated 03/13/2012 | Published 03/11/2012

Question:

You say: The BrakeRite EHB Adapter is wired by splicing the blue wire into the electric brake feed circuit going into the BrakeRite EHB Electric-Hydraulic Actuator, and then attaching the white wire to the white wire going into the actuator. This needs a diagram, I dont understand. Titans EHB manual is no help either.

asked by: Chris H

Expert Reply:

The BrakeRite EHB Adapter, # T4846000, has a blue and a white wire. The BrakeRite EHB Electric-Hydraulic Actuator, like part # T4813100, has 5 wires that are blue, black, white, brown and purple.

You will want to splice the blue wire from the adapter to the blue wire from the actuator. This allows the adapter to intercept the signal from the brake controller through the electric brake circuit. Finally the white wire from the adapter will splice into the white wire from the brake actuator for the ground connection.

I have attached a diagram indicating the wire connections that need to be made between the adapter and the actuator.

expert reply by: John H