Possible Hitch to Fit 1995 Chevrolet P30

Question

Question:

I have a 1995 Chevrolet P30 stepvan, will this part work for that model?

asked by: Sam R

0

Expert Reply:

Your 1995 Chevrolet P30 is the type of vehicle that the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-16 was intended for. This is a multi-fit hitch that comes with brackets that allow it to drop down 16 inches to clear the lower bumper of your van.

As long as your frame is less than 44 inches wide this hitch could be made to fit since it's a universal design.

We have a version of this with shorter drop brackets as part # 41990-07 which has 7 inches of drop instead.

expert reply by: Jameson C

0

Answer 1

I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a service body truck like yours are multi-fit hitches like the #41990 that has a 16k capacity. This is a weld on hitch that would require either the 7…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

The best trailer hitch option we have for an International 3800 School Bus is the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part #41990-16. This hitch is a great option as it can be bolted-on (once drilled) or welded, the brackets can…

view full answer...

Answer 6

Yes, the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part #41990-16 is exactly what you are looking for as it has very tall side brackets which will be more than enough to get the receiver tube down under the rear bumper, adjustable…

view full answer...

Answer 7

We have many hitch options for a truck that has a lift gate, but very few of them are a simple bolt on custom application. Because the locations for attaching lift gates vary, you will need to use a weld on option like the Class V Universal Weld-on…

view full answer...

Answer 8

Hey George, I checked with Torlift and at this time they do not have any hitches that fit the rear of your 2025 Ram 3500 but we do have the Curt part #C15801 which is our highest rated hitch that fits your vehicle as it is rated to tow up t a 20,000…

view full answer...

Answer 9

The best option for a trailer hitch receiver for your Chevy 4500 shuttle bus is going to be a weld on/bolt on option like you said, and the correct one will simply depend on the width of your frame from outside to outside, and the height of the…

view full answer...

Answer 10

Your 2016 Isuzu NPR will need a weld-on trailer hitch, and there are a couple of options from Draw-Tite, which is the same manufacturer as Reese hitches. Based on my research, a '16 NPR has a 33-1/2 inch chassis width, so you can choose from…

view full answer...

Answer 11

Yes, the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part #41990-16 is designed specially for the purpose of attaching to larger frame vehicles like a semi so this will work perfectly for you. The Draw-Tite Ultra Frame Service Body…

view full answer...

Possible Hitch to Fit 1995 Chevrolet P30

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching