Rack'em Grass Catcher Compatible with Toro Zero Turn Mower

Question

Question:

Will this grass catcher fit a 52 inch Toro Z mower

asked by: Christy J

0

Expert Reply:

The Rack'em Grass Catcher for Toro Lawn Mower with Z-Cut Deck # RCMMS4-EXS1-TORO will fit your 52 inch Toro Z mower deck if it has the Z-cut deck. If you have the regular deck then you will use # RCMMS4-EXS1 instead.

The best way to determine that fit is to look at the discharge on your deck. The Z-cut will have little cutouts on the front and middle directly on the lip that is raised about 1-1/2 inches. If that lip does not have any cutouts then it is the regular deck. I've attached a photo to help determine if you have the Z-cut like what is shown.

expert reply by: Jason S

0

click to enlarge

Answer 1

The correct catcher will depend on the discharge opening behind that deflector shown in your photo. If it has the deck with a Z-bracket as shown in the provided photo, you'd use #RCMMS4-EXS1-TORO. If it doesn't have the z-slot, but has a 4…

view full answer...

Answer 2

The correct fit for your zero turn Toro Timecutter is the Rack'Em Grass Catcher for Toro Lawn Mower with Z-Cut Deck #RCMMS4-EXS1-TORO.

view full answer...

Answer 3

If your Toro Timecutter has the Z cut deck that extends out further than the rear wheel, you'd use the Rack 'Em #RCMMS4-EXS1-TORO catcher. If you have the regular deck, you'd use #RCMMS4-EXS1. The Z deck has notches or slots in it as…

view full answer...

Answer 4

So normally for a Wright Stander mower you'd want the RackEm grass catcher part #RCMMS4-BS2 and for the Toro 52 grandstand you'd want the #RCMMS4-EXS1-TORO. What you could do is use the #RCMMS4 which fits both as the main catcher assembly and…

view full answer...

Answer 5

Since your Toro has the Z-Cut Deck you definitely want to go with the Rack'em Grass Catcher #RCMMS4-EXS1-TORO over the part #RCMMS4-EXS1. I'm not sure when or why Toro puts the Z-Cut Deck on different mowers but according to your picture that…

view full answer...

Answer 6

If your Toro Timecutter has the Z cut deck that extends out further than the rear wheel, you'd use the Rack 'Em #RCMMS4-EXS1-TORO catcher. If you have the regular deck, you'd use #RCMMS4-EXS1.

view full answer...

Answer 7

Hello Mark. The correct grass catcher for your Husqvarna Z4219 is the Rack'Em Grass Catcher #RCMMS4-EXS1. This comes with the 4.4 cubic foot grass catcher and the custom face plate.

view full answer...

Answer 8

Your Toro Timecutter should have the Z-Cut deck. I have attached a picture below so you can confirm. You will want the Rack'Em Grass Catcher for Toro Lawn Mower with Z-Cut Deck item #RCMMS4-EXS1-TORO. The custom face plate provides the connection…

view full answer...

Answer 9

Hey Karl, the correct Grass Catcher you'd need for your Toro Timecutter is the part #RCMMS4-EXS1-TORO.

view full answer...

Answer 10

We have a couple of options depending on your deck. While the Rack'em Multi-Mount Grass Catcher part #RCMMS4 is part of it you need the face plate to match. If your Toro uses the Z-Cut deck use the Rack'em Grass Catcher for Toro Lawn Mower…

view full answer...

Answer 11

If your Toro Timecutter has the Z cut deck that extends out further than the rear wheel, you'd use the Rack 'Em #RCMMS4-EXS1-TORO catcher. If you have the regular deck, you'd use #RCMMS4-EXS1.

view full answer...

Answer 12

The Rack'Em Grass Catcher #RCMMS4-EXS1 will work for your Toro lawn mower if it has a regular deck. If your Toro lawn mower has a Z-cut deck you will need The Rack'Em Grass Catcher #RCMMS4-EXS1-TORO. The best way to determine that fit is to…

view full answer...

Rack'em Grass Catcher Compatible with Toro Zero Turn Mower

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching