Replacement Mounting Brackets for Westin HDX Grille Guard on 2012 Ford F-150

Question

Question:

what mounting kit fits 2012 ford f150 aco boost 3.5 liter, I have a 36906 on the box, they say its for a 2009-2014 ford f150, westin grille guard number is 57-2505

asked by: Wesley G

0

Expert Reply:

The Westin HDX Grille Guard with Punch Plate - Black Powder Coated Steel # 57-2505 is a confirmed fit for your 2012 Ford F-150 EcoBoost. The mounting kit you need is the Replacement Mounting Hardware Kit for Westin HDX Grille Guards # 57-250PK. You are correct it will fit 2009-2014 Ford F-150 models whether EcoBoost or not.

expert reply by: Jason S

0

Answer 1

I reached out to Westin and that number corresponds with the date of production but does not indicate which specific model you have. Assuming you have the Westin HDX #57-2500 or #57-2505 which is confirmed to fit the 2010 Ford F-150 the correct…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 6

For your 2013 Ford F-150 XLT with the Westin HDX Grille Guard with Punch Plate #57-2505, you can use the: -Replacement Mounting Hardware Kit for Westin HDX Grille Guards #57-250PK for replacement hardware. This hardware kit includes all the mounting…

view full answer...

Answer 7

You will either need to know exactly what what part number the unit is or check the grille guard for any markings. Do note that not all manufacturers stamp the part numbers on their grill guards so if you do not have either you are going to need to…

view full answer...

Answer 8

It sounds like you are looking for replacement hardware for the Westin HDX Grille Guard for your 2019 Ford F-150. If you have the #57-3835 or #57-3830 the correct mounting hardware is the #57-383PK. You will need to confirm that this is the model you…

view full answer...

Answer 9

The Westin HDX Grille Guard you have now part #57-3835 fits the 2015 through 2020 F-150's so it should fit as-is and not require any different mounting hardware. Going with the new hardware #57-378PK won't give you anything differently from…

view full answer...

Answer 10

Hello Alberto, thanks for reaching out. We do carry the Westin Grill Guard #57-93705, but I am sorry to say we do not offer the mounting kit for this as a separate part. We only offer it with the grille guard as a complete kit. I suggest you try…

view full answer...

Answer 11

Yes, for your Westin HDX Grille Guard with Punch Plate #W53XV the correct replacement mounting hardware is the: -Replacement Installation Hardware Kit for Westin HDX Grille Guard with Punch Plate #57-236PK.

view full answer...

Replacement Mounting Brackets for Westin HDX Grille Guard on 2012 Ford F-150

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching