Locating Factory Brake Controller Port on 2017 Nissan Pathfinder
Updated 06/07/2018 | Published 06/06/2018
Question:
Tight space under the dash of my 2017 pathfinder - do you have a picture showing the electric brake connector under there? The one I found does seem to match the 3050p adapter.
asked by: Robin H
Expert Reply:
The Tekonsha Plug-In Wiring Adapter # 3050-P that you referenced is the correct harness to install a brake controller like the Tekonsha Prodigy P3 # 90195 on your 2017 Nissan Pathfinder. We do not have a picture available of the factory plug on your 2017 Pathfinder, but it will be located underneath and left of the steering column. It should be taped to another harness near the emergency brake pedal. The correct plug will be a 6-pin connector.
I have attached an installation video on the 2013 Pathfinder that you might find helpful. The brake controller port location should be the same on your 2017 model. As you can see in the video, the port is likely pretty hidden behind various other wires behind the dash.
I have attached the written instructions that you can also take a look at.
