Adding a 7-Way Trailer Connector and Brake Controller to a 2007 Chrysler Pacifica
Updated 03/28/2018 | Published 03/26/2018
Products Featured in This Question
Question:
Hi - I have the 2007 Pacifica, AWD Limited with the 4.0. I am adding a hitch to tow a small vintage camper, and I would like to use the Hopkins Agility as my brake controller. What other specific items will I need to complete this installation? I believe it will be a T connector kit specific to this vehicle to get me the 4 pin, but then I will need something to convert to a 7 pin back there. Then, will I need additional adapter to plug in the box up front? I dont know that the Pacifica has a plug and play connector under dash. Thanks for any help you can provide in putting together a shopping list!
asked by: Nate
Expert Reply:
To add a 7-Way trailer connector and brake controller to your 2007 Chrysler Pacifica you will start by installing a 4-Way harness # C55530.
Then to add the 7-Way and the wiring for the brake controller you will need # ETBC7. I have included some links that show and explain the ETBC7 installation for you.
There isn't a brake controller harness specifically for your Pacifica so the controller, # HM47294, will need to be hardwired in. The ETBC7 comes with the parts needed to do this.
