Trailer Hitch Recommendation for 2017 Fiat 500e  

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

In order to flat-tow a 2015 Fiat 500 with all four wheels on the ground behind a motorhome you are going to need a tow bar, base plate kit, safety cables, tail light wiring harness, supplemental braking system, and possibly a high-low adapter. There…

For your 2013 Fiat 500 Turbo, the Curt #C11363 is a confirmed fit. I've attached the installation instructions which state this fit to assist. You would also need the stabilizer strap #18050 for accessories like a bike rack or cargo carrier.

The Curt Class I Receiver Hitch #C11363 is confirmed to fit your 2015 Fiat 500. This is a fully welded, corrosion-resistant Class I hitch that will use existing holes in your Fiat's frame for a no-drill installation. The heat shield on the…

While there isn't an adjustable option, there are dual hitch adapters for flat towing that allow you to tow your vehicle and carry a bike rack at the same time. The right one just depends on the amount of rise or drop you need. Also keep in mind…

I recommend the Roadmaster Dual Hitch Receiver Adapter, 10" Drop/Rise item #RM-077-10. This adapter was designed for this type of set up. Your Jeep Rubicon and Swagman E bike rack weigh well below the 10,000 lbs maximum capacity of this hitch. I…

There are specific fits for a 2010 Mazda 3 for the hatchback vs. the sedan. If you have a sedan, I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" #C11393. If you have a hatchback, I recommend the Draw-Tite Sportframe…

I was able to look at your account and it t looks like you have the Replacement Head for Reese Weight Distribution System part #RP58167. When you ask if you can replace the spring bars with a 1700 bar I believe you are referring to Reese Replacement…