Why Is Key Stuck in Yakima SkyBox 12

Question

Question:

i just got home with a new skybox 12, puy the key in and opened the box and cannot get the key out.

asked by: John M

0

Expert Reply:

Are you trying to pull the key out with the box open? It's designed not to let the key out until you close it so that you don't accidentally take off with your lid open and have everything in the box fly out on the highway.

expert reply by: Jameson C

0

Answer 1

Stuck keys are at times very difficult to remove, even after spraying lubricant. We have heard that some people have luck using a paperclip along side the stuck key to free it by wiggling it. You could try using a pair of pliers or vise grip to pull…

view full answer...

Answer 2

The correct replacement handles for a Yakima SkyBox made from 2009 on is the Replacement SuperLatch Handle Assemblies for Yakima SkyBox Rooftop Cargo Boxes #Y8880348. These come in a quantity of two with lock cores and keys, so you have the right…

view full answer...

Answer 3

I attached a picture that shows instructions for replacing the handle of your Skybox 16 part #Y07336 with the part #Y8880348 that you referenced. This handle hasn't changed since 2014. Depending on which Skybox you have and what year it was…

view full answer...

Answer 4

If you have the Yakima Raptor Aero Y02093 then that bike rack already comes with feet that mount to factory bars. The original Raptor only fit the round bars so if you have the original Raptor then MightyMounts #Y03590 can be used. The MightyMounts…

view full answer...

Answer 5

There isn't any type of special removal available for a stuck Yakima lock core, as it sounds like you tried the only remedy that we generally suggest, which is a lubricant. Otherwise, the only way to remove it really is by having it drilled out;…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 12

Hi Stephanie! Great question and you’re totally right to ask, because most hitches for the 2024 RAV4 do require a bit of bumper trimming. That includes the Oris Detachable Hitch #TS66VR, since it uses a hidden design that needs a hole cut in the…

view full answer...

Why Is Key Stuck in Yakima SkyBox 12

Continue Researching