Availability of 15 inch Wheel With a 4 on 4 Bolt Pattern

Updated 06/15/2017 | Published 06/14/2017

Products Featured in This Question

Aluminum Split Spoke Trailer Wheel - 13" x 5" Rim - 4 on 4

(482)

$112.20

Loadstar ST185/80D13 Bias Trailer Tire - Load Range D

(3775)

$94.89

4" Carbon Fiber Digital Caliper

(26)

$12.23

Question:

Im wondering if there are any Wheels available with a four on four patterns that are 15 inches tall and about four inches wide. They dont necessarily have to hold a massive amount of weight like that period mostly for looks on a trailer I am a making. I want to be able to run 7.00 x 15 tires for the height and look. If I not do that, I need to know that my other Hub options might be. That way I can run a tall skinny Tire. I want something at least 28 inches tall if not taller. Again it is all for looks.

asked by: Lance

Expert Reply:

We do have wheels that will fit hubs with a 4 on 4 bolt pattern. Unfortunately the biggest wheel that we have to offer for that bolt pattern is only 13 inches.

A great looking 13 inch wheel that will fit your 4 on 4 bolt pattern is the Aluminum Split Spoke Trailer Wheel # AM22322HWT but I am linking our selection of 13 inch wheels for you to look through as well.

The biggest tire that we have for the 13 inch wheels is the Kenda Loadstar # AM1ST79 which is 185/80/13. If you combine it with one of the 13 inch wheels the total diameter will be right about 24-1/2 inches which is about 3-1/2 inches shy of what you are looking for.

If you would like to change the hubs on your trailer to 15 inches then there are a few pieces of information that I will need from you. If you look at the picture that I have attached you can use it as a reference for the information. To determine what (or if) 15 inch hub will fit your axle you can either use a Digital Caliper # PTW80157 to measure the different points on your spindle, or you can check your bearings and grease seal to see if they have any part numbers on them. If you can get me that information then I can see if we have any hubs that are compatible with your axle.

expert reply by: Jon G