Replacement Parts For Reese Straight Line Weight Distribution System

Updated 04/28/2017 | Published 04/26/2017

Products Featured in This Question

Replacement Head for Reese Weight Distribution System - Round Bar

(51)

$304.07

Replacement Weight Distribution Bolt-Together Round Bar Head

(50)

$235.03

Replacement Round Spring Bar for Reese Weight Distribution System - 800 lbs TW

(24)

$112.73

Question:

I have a jay feather by jayco. The empty weight is 3620 lbs., gross weight is 4750 lbs. We will be using a 06 dodge durango with a factory installed tow package. The id decal on the hitch head is all chewed up, I don't know the brand of the hitch. The angle rivet has been bent and it wore a groove on the inside surface of the hitch head. The spring clips are worn. I know I have to replace the hitch head. The spring bars are round and they have a draw tite decal on them. The frame has anti sway devices attached, and the decals on them say reese. I'm assuming it all must have worked for the previous owner. I'm trying to find out what brand hitch head I need to get that will accommodate the round draw tite spring bars. Thanks for any advice you can provide.

asked by: Joe B

Expert Reply:

It looks like you have parts of two different systems. One is parts is the dual cam arm of the Strait-Line Weight Distribution System w Sway Control - Round Bar # RP66087 and the other is a Draw-Tite Pro Series # PS58442. I recommend the Replacement Head for Reese Weight Distribution System - Round Bar # RP58112, along with the Replacement Round Spring Bar for Reese Weight Distribution System - 800 lbs TW # RP58114 if your bars are not these as the straight line system will suite you very well.

expert reply by: Jason S