Trailer Hitch Receiver and Other Parts to Tow a Trailer with a 2010 Chrysler Sebring Convertible
Updated 04/26/2017 | Published 04/25/2017
Products Featured in This Question
Question:
Will the Curt #11081 hitch fit my 2010 Chrysler Sebring convertible? It is listed on your web site as fitting a sedan.
asked by: Rick
Expert Reply:
The Curt Trailer Hitch Receiver # C11081 is confirmed to fit the 2010 Chrysler Sebring sedan but not the convertible model. For the convertible use Draw-Tite # 24871 that is confirmed to fit.
If you're going to be towing a trailer with the Sebring then you'll need trailer wiring as well. Use # 118444 which plugs in behind both tail lights. Also the recommended ball mount is the Draw-Tite # 3594. It gives you 4 inches of rise. The compatible hitch ball is # 19256 for a 1-7/8 inch ball and # 19258 for a 2 inch ball.
If you need a ball mount with a different rise or drop I've attached a link of our selection of ball mounts for a 1-1/4 inch hitch receiver as well as an article to help you determine the correct rise or drop you may need. Once you choose a ball mount you can then choose a hitch ball to fit it.
For a pin and clip use # PC2.
Product Page this Question was Asked From
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- For Towing
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Replacement 4.4K Electric Brakes with Offset Mounting Bolt Pattern
- Q&A: How Tight Should the Spindle Nut be on a Dexter 8,000 Pound Axle
- Q&A: Trailer Hitch and Wiring for a 2008 Chrysler Sebring Convertible with Dual Exhaust
- Article: How to Measure for Trailer Hitch Drop
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Q&A: How to Figure Out Which Reese Goose Box Fits Fifth Wheel Trailer
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Identifying Industry Standard Above-Bed Rails (ISR) on 2011 Chevrolet Silverado
- Q&A: Is There a Class II Trailer Hitch Receiver Available for a 2008 Chrysler Sebring Convertible