Thickness of Side Plates on the Class IV Weld-on 44" Wide Ultra Frame Trailer Hitch Receiver
Updated 06/01/2016 | Published 05/30/2016
Question:
How much is the from bottom of frame to receiver ? And how thick are the plates ?
asked by: Gary
0
Expert Reply:
The thickness of the side plates of the # 41990-16 measures 3/8 of an inch.
The side brackets are designed to provide 16 inches of drop from the frame it gets welded to. But depending on where you weld the hitch this dimension could be different from that.
expert reply by:
Jameson C
0
Continue Researching
- Shop: Trailer Wiring
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Search Results: akhd~545~35~k
- Shop: LED Trailer Fender Clearance Light - Submersible - 2 Diodes - Amber/Red - Driver or Passenger Side
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-3/4
- Shop: Snap-on Reflector Ring for Flange or Surface Mount Trailer Lights - Red
- Shop: Ramp Door Hinge - 8-3/16" Long - 1" Pin Diameter - Steel
- Shop: Optronics LED Trailer Tail Light - Stop, Turn, Tail - Submersible - 10 Diode - Oval - Red Lens
- Shop: Optronics Fleet LED Trailer Tail Lights w/ Grommets - Stop,Turn,Tail - Submersible - Oval - Qty 2