Parts Needed to Install a Brake Controller in a 2012 Chevy Equinox
Updated 05/17/2016 | Published 05/14/2016
Products Featured in This Question
Question:
2012 equinox with a factory hitch. How can I tell if it is already wired for a brake controller?
asked by: Keith M
Expert Reply:
We have a way to install a brake controller in your 2012 Chevy Equinox, but it would not be pre-wired for a brake controller like some vehicles are.
You will need to start with a 4-way (if you do not have one). For that you would want the # 56094.
From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install Kit and 7-Way Adapter part # ETBC7. I attached installation instructions and an install video for this product as well.
For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount of braking the tow vehicle is applying and applies a proportionate amount to the trailer brakes.
