How to Release Air Line from Air Suspension Enhancement Kit Fittings
Updated 04/20/2016 | Published 04/18/2016
Products Featured in This Question
Question:
You describe removing 1/2inch airline from a fitting is this the same procedure as one would use with the 1/4inch line? Im not sure as to removal. I have leak and will be tearing down system after locating any leaks. Can the old fitting be used with new line?
asked by: Bill B
Expert Reply:
To release air lines from fittings like the part # F3025-1 all you need to do is push in on the collar of the fitting while pulling the air line out and it will release. Since you are replacing leaky line you could certainly use old fittings as long as they too are working well.
I attached a picture that shows where to push to get the line to release.
Product Page this Question was Asked From
Firestone 1/4" Air Line Tubing - 30' Long, Red
- Accessories and Parts
- Air Bag Compressor Kit
- Vehicle Suspension
- Air Lines
- 1/4 Inch Tubing
- Tubing
- 30 Feet Long
- Red
- Firestone
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Anti-Rattle Devices
- Q&A: Comparing Firestone Dual Air Command Systems # F49VV and F46VV
- Q&A: Does Air Lift WirelessAIR Compressor System 74000 Come with Manual Fill Valves
- Q&A: Recommended Replacement Manual Inflation Valves for Air Bag Suspension Systems
- Q&A: Differences In Firestone Ride-Rite F2709 and Red Label F2613 For 2023 GMC Sierra 3500
- Q&A: Air Bag Suspension Enhancement Recommendation for 2024 Chevy Silverado 2500 ZR2
- Q&A: Offset Gooseneck Ball For 2024 GMC Sierra 3500 with OEM Prep Package
- Q&A: Choosing Between Air Lift Load Lifter 5000 or 7500 For 2018 Ram 2500 Towing 5th Wheel
- Article: Where to Position the Trailer Axle?
- Article: The Basics: Firestone Air-Spring Kits