7-Way and 4-Way Trailer Connector for a 2004 Toyota Sequoia with 7-Way and Different Pin Out

Updated 04/12/2016 | Published 04/09/2016

Products Featured in This Question

Hopkins Plug-In Simple Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Flat Connectors

(234)

$35.59

Replacement Multi-Plug 7-Way and 4 Pole Trailer Connector

(112)

$55.58

Question:

My 2004 Toyota Sequoia has a different pin layout on the 4 pin connector. Mine has the turn signal wires next to each other instead of up and down. I could not locate the vehicle application guide you referred to in the case of the 2 different wiring styles. I have it hard wired for now but want the 7 way plug.

asked by: Chris F

Expert Reply:

For your 2004 Toyota Sequoia you would want the part # 20137 to give it a 7-way and a 4-way. We have heard of the pin outs on the connectors being different so what you would need to do is cut the wires of the connector so that they match what your vehicle has. I wish we had a separate connector for the different pin outs but at this time we do not.

expert reply by: Jameson C