Recommended Trailer Hitch To Pull 32 ft Fleetwood Travel Trailer
Updated 07/29/2015 | Published 07/28/2015 >
Products Featured in This Question
Question:
I have a 2011 Toyota Tundra 5.7L. What would be the best hitch system to buy
asked by: Larry A
Helpful Expert Reply:
To determine if your 2011 Toyota Tundra can pull your 32 ft travel trailer, you will need to find the towing capacity of your Tundra and the gross vehicle weight rating (GVWR) of the trailer to determine if you can tow the trailer safely. You will want to check your owners manual to verify the rating.
Based on my research it looks like your Fleetwood may have a dry weight of 6400 lbs and 860 lbs hitch weight.
The trailer hitch I recommend is The Draw-Tite hitch # 75527. This is a Class III hitch and is rated at 600 lbs tongue weight and 6000 lbs gross trailer weight. I would also recommend using a weight distribution system with sway control like Curt MV Weight Distribution System w Friction Sway Control # C17075. With this system your hitch's towing capacity will increase to 8000 lbs. This system will also help reduce sway and distribute the tongue weight of the trailer.
I have also attached two FAQ articles on weight distribution systems and tongue weight for you to review.
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- For Towing
- Class III
- 600 lbs TW
- 6000 lbs GTW
- 8000 lbs WD GTW
- 2 Inch Hitch
- 800 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media





Continue Researching
- Shop: Trailer Hitch
- Q&A: Shear Strength of Anti-Rattle Hitch Pin for 2" Trailer Hitches
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Anti-Rattle Hitch Pin for 2" Trailer Hitches
- Shop: Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches - 3-1/2" Span
- Video: Install: Draw-Tite Max-Frame Trailer Hitch Receiver on a 2007 Toyota Tundra
- Video: Setting up the Draw-Tite Max-Frame Trailer Hitch Receiver on a 2013 Toyota Tundra
- Video: Installing the Draw-Tite Max-Frame Trailer Hitch Receiver on your 2008 Toyota Tundra
- Video: An In-Depth Look at the Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches
- Video: All You Need to Know About the Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches
- Q&A: Do You Have a Hitch for a 2026 Nissan Rogue?
- Q&A: Can A Headache Rack Be Used With The etrailer Over-The-Cab Ladder Rack
- Q&A: How Much Weight Can I Tow With A 2013 Toyota Tundra CrewMax
- Q&A: What Size Trailer Hitch Receiver Opening Comes On a 2024 Chevrolet Silverado 3500?
- Q&A: Location of Brake Controller Port on 2015 Toyota Tundra
- Article: Gooseneck to 5th Wheel Adapters
- Q&A: Is Towing With A Hitch Better Than Towing With A Ball Mounted To Bumper
- Article: How to Choose the Right Trailer Hitch Class
- Article: Roof Rack Information
- Article: How to Measure for Trailer Hitch Drop
- Article: Frequently Asked Questions About Transmission Coolers
- Article: Transmission Cooler
- Article: Trailer Wiring Diagrams

