Will Bar Style Friction Sway Control Interfere with Bed Supports on Coleman Sun Valley Trailer
Updated 06/16/2015 | Published 06/14/2015
Products Featured in This Question
Question:
My Coleman/Fleetwood pop up has two bed supports welded under the tongue 9 inches behind the ball. Each of these bed supports protrude out about 2 3/4 inches on each side of the tongue and also serve as chain mounts. Would these supports interfere with a friction anti sway bar installation? This pop up has a 12 foot box, a dry weight of 2035 lbs., and a GVW of 3500 lbs. Barring any interference issues, which anti sway bar would you suggest? I would also need a sway ball adapter for my current ball mount. Thanks!
asked by: Paul W
Expert Reply:
It does look like those supports would interfere with a friction sway control bar such as # 83660. I recommend using a weight distribution that has sway control built in such as # FA92-00-0600 rated for up to 600 pounds tongue weight.
You would just need a ball for this system, # A-90 for a 2 inch or # 19286 for a 2-5/16 inch.
