Trailer Wiring and Hitch Recommendation for a 2007 Chrysler Town and Country

Updated 05/07/2015 | Published 05/06/2015

Products Featured in This Question

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

(170)

$291.07

10 Gauge Wire - Blue Primary - Per Foot

(104)

$1.77

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(315)

$35.50

Adapter 4-Pole to 7-Pole and 4-Pole

(660)

$61.72

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

(187)

$222.43

40 Amp In-Line Circuit Breaker - Perpendicular Mount Bracket

(97)

$9.84

Hopkins 7-Way RV Style Connector with Molded Cable - Trailer End - 8' Long - RV Standard

(925)

$46.90

Question:

Hi, Im looking for a hitch and a wiring harness to tow a pop up camper with my 2007 town and country touring. It currently has no towing package. Pop up needs a pos and neg along with the normal four wires. I have to replace the trailer harness that had a 7 blade to 6 pin square that ran into the 6 pin square female recessed In the frame where there is a broken pin. If you could help me with this I would be greatful.

asked by: Jeremy H

Expert Reply:

First lets start with a hitch for your 2007 Town and Country. If you have stow and go third row seats you would want the part # 75305, or if you do not have the stow and go seats part # 75119. I attached install videos for both hitches.

For wiring you will want to first start with a 4-way. For that you will want the part # 118300. Now to convert it to a 7-way so that you can run a power wire to the trailer you will need the part # 37185. This will plug into the 4-way and then you will need to run the black wire of the connector to the positive battery post of your vehicle with 10 gauge wire like part # 10-1-1 through a breaker like # 9510. The white wire will get ran to a clean metal surface on your vehicle frame.

You will want to replace your current trailer connector with a new 7-way like part # H20046. You will need to cut off the current one and wire it by function to the # H20046. I attached a chart that lists how it would wire up.