Will P3 Brake Controller # 90195 Work For Triple Axle Trailer with Electric Over Hydraulic Brakes
Updated 04/20/2015 | Published 04/19/2015
Products Featured in This Question
Question:
I have a - 1000 PSI, Carlisle Hydrastar-1600 Elec/Hydraulic - Brake Actuator on my three axle trailer disc brakes with 14000gvwr when loaded would the p3 work on this setup and do you also have quick connect wiring for a 2005 350 super diesel xlt
asked by: Philip D
Expert Reply:
The Tekonsha Prodigy P3 Trailer Brake Controller, # 90195, can be used for trailers with up to 4 axles and is for use with electric or electric-over-hydraulic trailer brakes so this brake controller will work for you.
As long as your 2005 Ford F-350 is equipped with a 7-way you will just need the Tekonsha Plug-In Wiring Adapter, # 3065-P, to get things wired up and ready to go. Super quick and easy installation, one end of the adapter plugs into the built-in port beneath the dash and the other plugs into the brake controller.
If your truck is equipped with a 4-way connector you will need Wiring Adapter, # 37185, in addition to the adapter.
I have attached an article on brake controller installation for your Ford Super Duty truck.
