Location of Brake Controller Port Under Dash of 2015 Toyota Tundra with Factory Tow Package
Updated 03/27/2015 | Published 03/26/2015
Question:
Where is the vehicles wiring harness plug located for the trailer brake controller on a 2015 Toyota Tundra with tow package?
asked by: Kevin R
Expert Reply:
The brake controller port for the 2015 Toyota Tundra is located behind the section of the dashboard with the tow/haul button. To reach the connector you will need to locate the notch in the access panel in the center of the dash near the driver's side. Using a trim panel puller like # ALL648544, carefully pry the panel out and undo the locking tabs to remove the panel. You will find the mating connector behind this portion of your dashboard.
The correct harness for your 2015 Tundra is part # 3031-P. Harness # 3040-P that you referenced is for older Tundra model years.
Continue Researching
- Article: Brake Controller Installation: Starting from Scratch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: How to Install a Brake Controller on a 2018 Toyota Tundra
- Q&A: What is the Difference Between the Tekonsha Prodigy P2 and the P3 Brake Controllers
- Q&A: Brake Controller Port Location on 2008 Toyota Sequoia
- Q&A: Brake Controller Installation Instructions for a 2006 Toyota Tundra with Factory Tow Package
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Trailer Wiring Diagrams
- Q&A: Replacing Factory Brake Controller on 2018 Toyota Tundra
- Q&A: Determining if 2013 Toyota 4Runner Can Tow 4,500 Pound Trailer
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Rooftop Cargo Carriers