How to Remove and Reinstall New EasySnap Mounting Kit for a Thule Cascade Ski Box  

Question:

Expert Reply:

To remove the EasySnap housing from your Thule Cascade cargo box you will need to lift up on the red safety tab of the housing and then turn the housing clockwise until it releases. To install the new clamps you will just need to reverse the process.

After you have lined up the cargo box on your roof rack, you would take the Easy-Snap brackets and begin by attaching the rubber mounting pads to the brackets.

Then, you would lift up on the small, red safety tab on the bracket, and turn the blue handle piece counter clockwise until you hear it click. Once you have done this, take the bracket and line it up with the mounting holes that line up with your roof rack cross bar, with the red tab facing the rear side of the vehicle.

Insert the included square U-bolts from the bottom side of your cross bar, up through the mounting holes on the cargo box. The U-bolts fit together with the brackets, and lock together when you turn the blue handle clockwise until it clicks. Finish by lowering the red tab. Make sure you cover the unused mounting holes with the included vinyl hole covers.

expert reply by: Jameson C

0