Westin HDX Headache Rack and Tonneau Cover Recommendation for a 2008 GMC Sierra  

For your 2014 Chevy Silverado you would want the Westin Headache Rack part #57-8025 as it attaches through the top of your bed rails which will allow a tonneau cover to install. If you have a 5-1/2 ft bed you would want the Deuce part #TX771801 If…

I do have a headache rack and toolbox that will work with one another on your 2014 GMC Sierra 1500 but the MaxxTow MaxxHaul Heavy Duty Headache Rack MT70234 is not confirmed to work with crossover style tool boxes. The only toolbox that would be…

The Westin HDX grille guard #57-2295 is designed to fit the 2007 GMC Sierra 1500 new body style as well as 2008 to 2013 models. It is not a fit for a 2007 Classic (old body style which would look like a 2006). Other than that there are no exclusions…

The mounting brackets you need are part #57-229PK. They're specifically for the Westin HDX grille guard, part #57-2295 on your 2010 GMC Sierra 1500.

As long as the tonneau cover you have on your 2017 Toyota Tundra installs inside of the bed rails then you should have no problem using a heachache rack such as the Westin HDX Headache Rack part #57-8025 for black or part #57-8023 for white. The…

As long as the hole on your riding lawnmower is 3/4" you can use the Reese Towpower 3-Way ATV Hitch #RP7065000 which will simply bolt into that hole. This hitch will give you the length you need to use a hitch ball with a 3/4" diameter…

The Westin HDX Headache Rack part #57-8035 that you referenced is a confirmed fit for your 2017 Ram 3500 and since it installs through just the top of the bed rails and does not wrap around them in any way it also is compatible with tonneau covers…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

Although both the #LM67048 and the #14125A bearings might have the same inner diameter of 1.25 inches, they aren't interchangeable. Both bearings are compatible with a different race or bearing cone. The races have a different outside diameter,…