What Wire to Use for Stoplight Circuit When Installing a Brake Controller in a Vehicle
Published 01/27/2015
Question:
brake lights are wired on truck to run through the signal wires and cant find where to hook brake light wire to run into the controller
asked by: Brad
Expert Reply:
Sounds like you are trying to use one of the brake light circuits for either the left or right side stop/turn circuit. Since the blinker is on that circuit it won't work.
What you will need to do is use a circuit tester like part # PTW2993 to test the wire coming from the brake switch near your brake pedal till you find a wire that has 12 volts when the brakes are applied and none when they are released. That will be the wire to use to install your brake controller.
I also attached an FAQ article on installing brake controllers for you to check out as well.
