The best option to add a hitch to your 2014 Hyundai Santa Fe Sport is the etrailer item #e98841 you were looking at. This class III 2" hitch is custom fit and bolts to your Santa Fe with included hardware. It has more then enough capacity to…
The Curt hitch part #C13152 that you referenced comes with 4 carriage bolts 1/2-13 x 4 1/2, 4 flange nuts HFN 1213, GR8, 4 hex bolts M10 - 1.25 x 25 and four 3/8 inch conical toothed washers. Plus a 11GA. (.1196) SPACER PLATE. We sell the replacement…
It sounds like there is a short somewhere along the wiring of your vehicle or trailer that is causing a fuse to blow every time you connect. The first thing I recommend doing is disconnecting the trailer and using a circuit tester like #PTW2993 to…
If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…
The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…
There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
Since your trailer uses a combined wiring system where the stop and turn signals run on the same circuit, in order to add a third brake light to your trailer you would need to use a 2-Wire to 3-Wire Converter, like part #118158. This will convert the…
The weld nuts in your 2012 Hyundai Santa Fe will use Grade 5 bolts that are M10- 1.25 x 30. There is also another bolt, washer, and nut on each side required for the installation of the Curt #C13073. The Draw-Tite Max-Frame Trailer Hitch Receiver -…
The Replacement Cover #852-2382001 is the correct part for both styles of the Thule Podium foot pack so it will work for the 460 for the square crossbars or the 460R for aero-style crossbars like what you have.
