Plug Kit for Bulldog Winch Air Tank - 1/4" NPT - Qty 3

Video Transcript for Review of Bulldog Winch Vehicle Suspension - Air Suspension Compressor Kit - BDW42020

Today we're going to take a look at the plug kit for the 1/4" NPT port. It's on your Bulldog winch air tank. It's for a quantity of three plugs. Now, this plug kit will let you seal three unused 1/4" NPT female ports on your Bulldog winch air tank. The threads on this is 1/4" and I just wanted to pull, here's a two gallon. Let me zoom out just a little bit.

I happened to pull a two gallon Bulldog winch tank, and most of these tanks will have, when they use the 1/4" NPT ports, they usually have anywheres from six to eight of them. So lots of times you might have to plug some of them.So here's four going in the middle here and there's four on the end here. So if you need to plug any of them, you just take these plugs, go ahead and insert them in there, whichever ones you're not going to use. Get them started and then just use an Allen wrench to tighten them completely down to seal it.But this kit will include three plugs. But that should do it for the review on the plug kit for the 1/4" NPT ports on your Bulldog winch air tank..