New Arrivals

Replaces (1) 5/8" vacuum line tee for Roadmaster InvisiBrake flat tow brake system (RM-8700).

• Accessories and Parts
• Flat Tow Brake System
• Fittings
• Tees
• Roadmaster

Extends your safety cables by 14". Set of 2.

• Accessories and Parts
• Safety Cables
• Tow Bar
• Safety Cable Parts
• 8000 lbs GTW
• Loop Extensions
• Roadmaster

Get power from your RV to your towed car for your flat tow brake system, your tail lights, and any other accessory. The cable is coiled so that it won't drag on the ground, and has a 7-Way plug on one end and a 4-way round on the other.

• Accessories and Parts
• Flat Tow Wiring Harness
• Adapters
• 7 Round - Blade to 4 Round
• Roadmaster

Mount a 6-round or 4-flat connector where you want it. Roadmaster's bendable plate uses 4 pre-cut segments for a one-time custom fit. 10-Gauge steel and black powder coat resist rust. Bolt, weld, or use the included hardware for a flush install.

• Accessories and Parts
• Trailer Wiring
• Mounting Hardware
• Brackets
• 6 Round
• 4 Round
• Roadmaster

Your towed vehicle faces a near constant barrage of rocks and road debris from your own RV's wheels and other traffic. Defend your front end with this impact-resistant shield and can keep your vehicle looking its best.

• Accessories and Parts
• Tow Bar
• Tow Bar Base Plate
• Vehicle Guards
• Rock Guard
• Guardian
• Roadmaster

Replaces 1 smart diode for tail lights with incandescent bulbs.

• Accessories and Parts
• Flat Tow Wiring Harness
• Diodes
• Roadmaster

Replaces 1 fabric anchor on the heat shield of your Roadmaster Tow Defender.

• Accessories and Parts
• Tow Bar
• Vehicle Guards
• Anchors
• Tow Defender
• Roadmaster

Replaces 1 slipper spring for your Roadmaster Comfort Ride leaf spring suspension kit (2500-60). Also works with older model 2560, however if you have older model 2560, you will need to replace all of your springs.

• Accessories and Parts
• Trailer Suspension Parts
• Leaf Springs
• Roadmaster

Extends your safety cables by 18". Set of 2.

• Accessories and Parts
• Safety Cables
• Tow Bar
• Safety Cable Parts
• 8000 lbs GTW
• Loop Extensions
• Roadmaster

Get power from your RV to your towed car for your flat tow brake system, your tail lights, and any other accessory. The cable is coiled so that it won't drag on the ground, and has a 7-Way plug on one end and a 6-way round plug on the other.

• Accessories and Parts
• Flat Tow Wiring Harness
• Adapters
• 7 Round - Blade to 6 Round
• Roadmaster

Replace the driver-side LED strip on your Roadmaster kit 157 to restore bright brake and turn signals. The flexible 10-inch strip sticks on with 3M tape and the color-coded pigtail easily connects to the kit's wiring.

• Accessories and Parts
• Flat Tow Wiring Harness
• LED Strip
• Roadmaster

Replaces the hardware kit for your Roadmaster base plate. This direct replacement kit works with base plates 524473-4 and 524473-5 to restore secure installation.

• Accessories and Parts
• Tow Bar Base Plate
• Hardware
• Roadmaster

Replaces the endlinks for your Roadmaster Anti-Sway bar kit. Measures 5/8" diameter x 16-3/8" long. Includes 2 end links, 8 black polyurethane bushings, mounting hardware, and instructions.

• Accessories and Parts
• Anti-Sway Bars
• Anti-Sway Bar Parts
• End Link
• Roadmaster

Replaces the driver's side male tube for the towbar side of your Roadmaster tow defender. Provides the attachement point for your driver side baseplate connection bracket and the screen.

• Accessories and Parts
• Tow Bar
• Vehicle Guards
• Tube
• Tow Defender
• Roadmaster

Easily mount your new BrakeMaster supplemental braking system with this custom seat adapter. Bracket remains hidden beneath your vehicle's seat when not in use.

• Accessories and Parts
• Flat Tow Brake System
• Seat Adapter
• Roadmaster

Got a mid-vehicle battery setup? A seamless installation means less time in the garage and more time on the trails. This kit has pre-crimped cables, fuses, and connectors for batteries up to 14'9" apart. Made for the Redarc BCDC Alpha 25A.

• Accessories and Parts
• Battery Charger
• Battery Charger Install Kit
• Redarc

Need to get your PowerDock wired up for your next adventure? This kit makes it easy with color-coded cables, tough hardware, and room to customize. It's built for rough trails, so you can get set up and get going in no time!

• Accessories and Parts
• Portable Chargers
• Cables and Cords
• Redarc

Got a rear-vehicle setup? A seamless installation means less time in the garage and more time on the trails. This kit has pre-crimped cables, fuses, and connectors for batteries up to 21"4" apart. Made for the Redarc BCDC Alpha 25A.

• Accessories and Parts
• Battery Charger
• Battery Charger Install Kit
• Redarc

Beach, campsite, or worksite - take your adventures off-grid! This all-in-one kit makes connecting your PowerDock a cinch. Hook up solar panels, power up anywhere, and rely on rugged Aussie durability to tackle the wild.

• Accessories and Parts
• Portable Chargers
• Cables and Cords
• Redarc

Got batteries close together? This kit has pre-crimped cables, fuses, and connectors for batteries less than 5' apart. Made for the Redarc BCDC Alpha 50A.

• Accessories and Parts
• Battery Charger
• Battery Charger Install Kit
• Redarc

Power your adventures with the GoBlock Inverter Connector Cable! Effortless, plug-and-play connection to your 400W Redarc inverter keeps you charged up, off-grid, and ready for the wild. Built tough, so you can explore worry-free!

• Accessories and Parts
• Portable Chargers
• Cables and Cords
• Redarc

Add this bracket to your 2008 or newer Toyota Landcruiser 200 to ensure your Redarc BCDC has plenty of airflow to keep it cool so it can keep your batteries charged. Mounts with included installation hardware.

• Accessories and Parts
• Battery Charger
• Mounting Hardware
• Brackets
• Redarc

Got a mid-vehicle battery setup? A seamless installation means less time in the garage and more time on the trails. This kit has pre-crimped cables, fuses, and connectors for batteries up to 14'9" apart. Made for the Redarc BCDC Alpha 50A.

• Accessories and Parts
• Battery Charger
• Battery Charger Install Kit
• Redarc

Use this plate to keep your trailer's king pin from rotating in your PullRite SuperGlide hitch. A capture plate is required to tow with the SuperGlide. This plate fits Lippert 1621, 1116, and 1716 pin boxes with 13-1/4" wide skid plates.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Trailair Pin Box
• Pullrite