New Arrivals

Your battery is out of sight, and now it's out of power. The indicator pigtail converts your SAE quick connector into a real-time battery monitor, so you always know when it's time to charge. The LEDs let you check your battery at a glance.

• Accessories and Parts
• Battery Charger
• Cables
• Battery Indicator Cable
• CTEK Power Inc

You're on the road, miles from an outlet, and your CS Free charger is running low. The 12V plug lets you recharge directly from your vehicle's 12V socket, so your charger is always ready when you need it. Just plug in and power up - anywhere.

• Accessories and Parts
• Battery Charger
• Portable Chargers
• Cables
• CTEK Power Inc

Your battery doesn't give warnings until it's too late. This indicator plug gives you an instant read on your battery's health through your 12V socket, so you always know when it's time to charge. No tools, no hassle.

• Accessories and Parts
• Battery Charger
• Plugs and Sockets
• Indicator Plug
• CTEK Power Inc

Your charger keeps your battery ready, but where do you keep your charger? The mounting bracket gives your charger a dedicated home, keeping it secure, off the floor, and always within reach. No more tangled cables or misplaced chargers.

• Accessories and Parts
• Battery Charger
• Mounting Hardware
• Brackets
• CTEK Power Inc

You toss your charger on the fender, lean in to check connections, hear it slide, and hit the ground. This case keeps your charger secure with a durable, non-slip silicone shield, protecting it and your vehicle from scratches. No more slips or drops.

• Accessories and Parts
• Battery Charger
• Cases
• CTEK Power Inc

You toss your charger on the fender, lean in to check connections, hear it slide, and hit the ground. This case keeps your charger secure with a durable, non-slip silicone shield, protecting it and your vehicle from scratches. No more slips or drops.

• Accessories and Parts
• Battery Charger
• Cases
• CTEK Power Inc

You toss your charger on the fender, lean in to check connections, hear it slide, and hit the ground. This case keeps your charger secure with a durable, non-slip silicone shield, protecting it and your vehicle from scratches. No more slips or drops.

• Accessories and Parts
• Battery Charger
• Cases
• CTEK Power Inc

In a busy workshop, efficiency is key. The Trolley Pro keeps your chargers, laptops, and testing equipment organized and mobile, so you can move seamlessly between tasks without missing a beat. Make sure your essential tools are always within reach.

• Accessories and Parts
• Battery Charger
• Workstation
• Smart Charge
• CTEK Power Inc

You invested in the CS Free to keep you powered up - now protect it. This case keeps your charger safe and organized. With a water-resistant design and padded interior, it ensures your charger and accessories stay secure wherever the road takes you.

• Accessories and Parts
• Battery Charger
• Portable Chargers
• Cases
• CTEK Power Inc

The BossHook is a forged steel recovery hook built to take abuse. It mounts flush so it won't rattle or beat up your fairlead, and it's rated at 31,967 lbs, so it's plenty strong for the rough recoveries you may run into.

• Accessories and Parts
• Electric Winch
• Hooks
• Hook w Clasp
• ComeUp

Replaces the 7.0 hp motor for your 12V ComeUp winch. Fits with DV-18, STS-15010, and STS-15012 winches.

• Accessories and Parts
• Electric Winch
• Motor
• ComeUp

This brake assembly is engineered for trailers with 9,000 to 10,000 lbs. axles. Its self-adjusting to ensure optimal braking efficiency with minimal maintenance. The integrated parking brake lever adds convenience and safety.

• Accessories and Parts
• Trailer Brakes
• Hydraulic Drum Brakes
• LH
• 10000 lbs
• 9000 lbs
• Brake Assembly
• 12-1/4 x 3-3/8 Inch Drum
• Dexter

Restore the performance of your Fortress oil cap with this complete service kit. Includes rubber plugs, oil fill plugs, and O-ring seals to prevent leaks, maintain pressure, and keep your hub looking squeaky clean.

• Accessories and Parts
• Trailer Bearings Races Seals Caps
• Service Kit
• Dexter

Kit helps repair your harness on your Dexter ABS tow system.

• Accessories and Parts
• Trailer Brakes
• Electric Drum Brakes
• ABS System Wheel Sensor Parts
• Wiring Harness
• Repair Kit
• Dexter Axle

Replaces your wheel sensor on your Dexter ABS tow system.

• Accessories and Parts
• Trailer Brakes
• ABS System Wheel Sensor Parts
• Electric Drum Brakes
• Sensors
• Dexter Axle

This replacement inner member slide easily fits into the existing housing of your Dexter A-84 Series or Legacy UFP surge brake actuator. For use with triple-axle trailers with hydraulic disc brakes.

• Accessories and Parts
• Brake Actuator
• Disc Brakes
• Inner Member
• Dexter

Replaces (1) 3-1/2" x 5/8"-18 Dexter Axle press-in wheel stud for 8K to 12K disc brakes or idler hubs with 5/8" studs.

• Accessories and Parts
• Trailer Hubs and Drums
• Boat Trailer Wheels
• Trailer Tires and Wheels
• Wheel Studs
• 5/8 Inch Diameter
• Drive-In Stud
• Dexter

Restore the performance of your Fortress oil cap with this complete service kit. Includes rubber plugs, oil fill plugs, and O-ring seals to prevent leaks, maintain pressure, and keep your hub looking squeaky clean.

• Accessories and Parts
• Trailer Bearings Races Seals Caps
• Service Kit
• Dexter

Replace the pivot hardware in your Dexter suspension equalizer with this complete OEM kit. Includes bushings, bolts, locknuts, and instructions to restore quiet, reliable performance.

• Accessories and Parts
• Trailer Suspension Parts
• Hardware
• Dexter

Passenger's-side 10" x 2-1/4" hydraulic drum brake assembly features a free-backing design for smooth reversing. Fits 3,500-lb axles with 13" to 15" wheels and mounts with a 4-bolt flange.

• Accessories and Parts
• Trailer Brakes
• Hydraulic Drum Brakes
• RH
• 3500 lbs
• Brake Assembly
• 10 x 2-1/4 Inch Drum
• Dexter

Replaces the cap for your Dexter 12V KTI hydraulic pump reservoir. Fits DC-4419 and DC45520.

• Accessories and Parts
• Dump Trailer Parts
• Hydraulic Pumps
• Caps
• Dexter Axle

Replace or add a reverse lockout solenoid to your surge brake actuator from Dexter or Tie Down Engineering to keep the actuator from activating your trailer brakes when you shift into reverse.

• Accessories and Parts
• Brake Actuator
• Disc Brakes
• Hydraulic Drum Brakes
• Solenoid
• Dexter

This brake assembly is engineered for trailers with 9,000 to 10,000 lbs. axles. Its self-adjusting to ensure optimal braking efficiency with minimal maintenance. The integrated parking brake lever adds convenience and safety.

• Accessories and Parts
• Trailer Brakes
• Hydraulic Drum Brakes
• RH
• 10000 lbs
• 9000 lbs
• Brake Assembly
• 12-1/4 x 3-3/8 Inch Drum
• Dexter

Restore the performance of your Fortress oil cap with this complete service kit. Includes rubber plugs, oil fill plugs, and O-ring seals to prevent leaks, maintain pressure, and keep your hub looking squeaky clean.

• Accessories and Parts
• Trailer Bearings Races Seals Caps
• Service Kit
• Dexter