New Arrivals
Peterson 2-Wire Pigtail - AMP-Style Connector for LED Trailer Lights - 7-3/4" Blunt Leads
In Stock
Plug in Peterson LED lights fast with this AMP-style pigtail. Blunt-cut leads give you wiring flexibility, and the 7-3/4" length makes routing easy. Seals tight for a weather-resistant connection you can trust on every haul.
- Accessories and Parts
- Trailer Lights
- Wiring
- Plugs and Pigtails
- Two Wire
- Straight Pigtail
- Peterson
Peterson Trailer Light Bracket - Surface Mount - 3-3/4" Long x 1-1/4" Wide
In Stock
This bracket mounts your light to the surface of your trailer.
- Accessories and Parts
- Trailer Lights
- Mounting Hardware
- Brackets
- Peterson
Label for ABS Malfunction Lamps
This sticker brings you into compliance with NHTSA requirements for labeling ABS malfunction lamps.
- Accessories and Parts
- Trailer Lights
- Labels
- Peterson
Peterson Grommet w/ Closed Back for 2-1/2" Diameter Trailer Lights
In Stock
Use this grommet to mount 2-1/2" round trailer lights. It's designed with a closed back to protect the connection from moisture and corrosion. Fits in 2-3/4" diameter cutout.
- Accessories and Parts
- Trailer Lights
- Mounting Hardware
- 2-3/4 In Diameter
- Grommet
- Round
- Peterson
Peterson Grommet for 2" Diameter Trailer Light - Round
In Stock
Mount your 2" trailer light using this grommet.
- Accessories and Parts
- Trailer Lights
- Mounting Hardware
- 2-3/4 In Diameter
- Grommet
- Round
- Peterson
Peterson Grommet for 3/4" Diameter Trailer Lights - Round
In Stock
Mount your 3/4" trailer light using this grommet.
- Accessories and Parts
- Trailer Lights
- Mounting Hardware
- 1 Inch Diameter
- Grommet
- Round
- Peterson
Replacement MORryde Single Top Step Tread - 23-1/2" x 9-1/2"
In Stock
Replaces the treat cover for the deep, top-step on your Gen 2 StepAbove RV steps with 23-1/2" wide treads.
- Accessories and Parts
- RV Steps
- Grip Tape
- MORryde
MOS UpLift Roof Rack Lift Assist w/ Lock - Clamp On
In Stock
Love outdoor adventures but struggle with lifting gear onto your crossbars? We recommend the MOS UpLift. Gas-strut-powered arms drop down to just over shoulder level, making it easier than ever to load gear. We even included a lock for security.
- Accessories and Parts
- Watersport Carriers
- Roof Box
- Roof Bike Racks
- Ski and Snowboard Racks
- Roof Rack
- Load Assists
- MOS Racks
Snowmobile Kit for Mad-Ramps Pivoting Ramp System for 2-1/2" Hitches
In Stock
Transform your Mad-Ramps setup into a loading system for your snowmobile. As long as your skis are 34" - 42" apart, you can use this kit - along with your Mad-Ramps - to easily and safely get your snowmobile in and out of your truck bed.
- Accessories and Parts
- ATV Ramps
- Truck Ramps
- Snowmobile Kit
- Mad-Ramps
Redarc BCDC Alpha 50A Across Engine Bay Wiring Kit
In Stock
If your start battery and secondary battery are at opposite sides of your engine bay, this wiring kit gives you everything you need to make connections with your Redarc Alpha 50A DC battery charger.
- Accessories and Parts
- Battery Charger
- Battery Charger Install Kit
- Redarc
Storage Bag for Redarc GoBlock Portable Power Station
In Stock
Keep your GoBlock safe on every adventure! The transit bag's rugged Oxford polyester material, rubber feet, and handy pockets make it the perfect travel buddy. Dust, dirt, or rough trails? No problem. Grab your gear and go!
- Accessories and Parts
- Portable Chargers
- Storage Bag
- Redarc
Redarc BCDC Charger Universal Mounting Bracket
In Stock
This bracket is designed to fit any vehicle's mounting points in the engine bay. Once mounted with the included hardware, it will help ensure your Redarc BCDC has airflow around it to keep it cool.
- Accessories and Parts
- Battery Charger
- Mounting Hardware
- Brackets
- Redarc
Spacer Kit for the Rack'Em Basket
Spacer kit for the 23x79 Rack'Em heavy-duty cargo basket for open trailers(RA-14). Adds extra clearance for a better fit, keeping your basket secure and stable on your trailer.
- Accessories and Parts
- Trailer Cargo Organizers
- Storage Basket Parts
- Spacers
- RackEm
Redarc BCDC Charger Mounting Bracket for Ford Ranger and Raptor
In Stock
Add this bracket to your 2022 or newer V6 Ford Ranger or Raptor to ensure your Redarc BCDC has plenty of airflow to keep it cool so it can keep your batteries charged. Mounts with included installation hardware.
- Accessories and Parts
- Battery Charger
- Mounting Hardware
- Brackets
- Redarc
Redarc BCDC Alpha 25A Side-by-Side Engine Bay Wiring Kit
In Stock
If your start battery and secondary battery are close to each other in your engine bay, this wiring kit gives you everything you need to make connections with your Redarc Alpha 25A DC battery charger.
- Accessories and Parts
- Battery Charger
- Cables
- Side-by-Side Wiring Cable
- Redarc
Redarc BCDC Alpha 50A Rear-Vehicle Install Wiring Kit
Got a rear-vehicle setup? A seamless installation means less time in the garage and more time on the trails. This kit has pre-crimped cables, fuses, and connectors for batteries up to 21"4" apart. Made for the Redarc BCDC Alpha 50A.
- Accessories and Parts
- Battery Charger
- Battery Charger Install Kit
- Redarc
Redarc BCDC Alpha 25A Across Engine Bay Wiring Kit
In Stock
If your start battery and secondary battery are at opposite sides of your engine bay, this wiring kit gives you everything you need to make connections with your Redarc Alpha 25A DC battery charger.
- Accessories and Parts
- Battery Charger
- Battery Charger Install Kit
- Redarc
PowerDock Docking Station for Redarc GoBlock Portable Power Station
In Stock
The PowerDock secures your GoBlock, charges it fast, and simplifies setup. Lock your GoBlock in, hit the trail, and pop the quick-release handle to go portable. With solar priority and anti-theft features, it's ready for any adventure!
- Accessories and Parts
- Portable Chargers
- Docking Station
- Redarc
Redarc BCDC Alpha 50A Mid-Vehicle Wiring Kit
Got a mid-vehicle battery setup? A seamless installation means less time in the garage and more time on the trails. This kit has pre-crimped cables, fuses, and connectors for batteries up to 14'9" apart. Made for the Redarc BCDC Alpha 50A.
- Accessories and Parts
- Battery Charger
- Battery Charger Install Kit
- Redarc
Redarc BCDC Alpha 25A Mid-Vehicle Wiring Kit
In Stock
Got a mid-vehicle battery setup? A seamless installation means less time in the garage and more time on the trails. This kit has pre-crimped cables, fuses, and connectors for batteries up to 14'9" apart. Made for the Redarc BCDC Alpha 25A.
- Accessories and Parts
- Battery Charger
- Battery Charger Install Kit
- Redarc
Redarc PowerDock Wiring Kit for Terminal Block Installation
In Stock
Need to get your PowerDock wired up for your next adventure? This kit makes it easy with color-coded cables, tough hardware, and room to customize. It's built for rough trails, so you can get set up and get going in no time!
- Accessories and Parts
- Portable Chargers
- Cables and Cords
- Redarc
Redarc BCDC Alpha 25A Rear-Vehicle Install Wiring Kit
In Stock
Got a rear-vehicle setup? A seamless installation means less time in the garage and more time on the trails. This kit has pre-crimped cables, fuses, and connectors for batteries up to 21"4" apart. Made for the Redarc BCDC Alpha 25A.
- Accessories and Parts
- Battery Charger
- Battery Charger Install Kit
- Redarc
Complete Installation Kit for Redarc PowerDock Docking Station
In Stock
Beach, campsite, or worksite - take your adventures off-grid! This all-in-one kit makes connecting your PowerDock a cinch. Hook up solar panels, power up anywhere, and rely on rugged Aussie durability to tackle the wild.
- Accessories and Parts
- Portable Chargers
- Cables and Cords
- Redarc
Redarc BCDC Alpha 50A Side-by-Side Engine Bay Wiring Kit
Got batteries close together? This kit has pre-crimped cables, fuses, and connectors for batteries less than 5' apart. Made for the Redarc BCDC Alpha 50A.
- Accessories and Parts
- Battery Charger
- Battery Charger Install Kit
- Redarc