New Arrivals

Tucked into the wall and sealed up tight, this docking station keeps your hookups organized and out of sight. Flip the door, hook up, and you'refree to kick back - your campsite setup just got way easier.

• RV Water Inlets
• City Fill Inlet
• Recessed Mount
• 2-1/8 Inch Deep
• Plastic
• Black
• B and B Molders

After a long day on the trail, backing up your Jeep with the spare tire in the way can be frustrating. You crane your neck and still can't see. With this camera, you get a wide, clear look at what's behind you on your custom display.

• Backup Camera
• Backup Camera Systems
• Spare Tire Camera System
• Hardwired
• 150 Degrees
• Brandmotion

Flush-mounted cable hatch for electrical cords up to 50 amp size. Sliding access door creates a pass-through for your cord, and slides back into place when not in use. Flush mount allows it to easily replace any round hatch up to 4-1/2".

• RV Access Doors
• Electrical Cable Hatch
• Round
• 5-1/8 Inch Diameter
• 3-1/2 Inch Diameter Cutout
• Black
• B and B Molders

You're replacing a sun-faded, road-battered, barely sealed access hatch that's been holding on by a thread since your last trip. You pull it off, line up the new one, and it fits. Like it was made for your rig from the start. Because it was.

• RV Access Doors
• Multi-Purpose Hatch
• Rectangle
• Locking
• 7-5/8W x 6-1/2T Inch
• 5-7/8W x 4-3/4T Inch Cutout
• Black
• B and B Molders

You're checking the base of the slide-out after a long weekend and notice the right-hand trim cap is gone. The open end is collecting dirt and giving water a way in. This replacement screws into place to cover the opening and matches your trim.

• RV Trim
• Plastic Molding
• White
• B and B Molders

Install this rear trim piece to cover and protect the top right corner seam of your RV. Designed to cover this crucial zone and wrap down the side for a finished look, this quality part is easy to install and won't fade or crack from UV exposure.

• RV Trim
• Plastic Molding
• Black
• B and B Molders

You're up on the ladder checking your slide-out and notice the corner is exposed. The square cover is gone, and now water's got a direct shot into the seam. This replacement squares it off, seals the joint, and blends right in with the trim.

• RV Slide Out Parts
• Caps and Covers
• Square Corner
• Bolt-On
• Beige
• B and B Molders

RV range vent made to withstand regular kitchen use and travel conditions you face on your adventures. With a low profile design and secure latching mechanism, this vent is often chosen as an upgrade for direct replacement. Won't crack or fade.

• RV Vents and Fans
• Range Hood
• Wall Vent
• No Fan
• Plastic
• Black
• B and B Molders

Easily adjust warm or cool airflow in your RV to keep comfortable. Use the rotating grille to control directional flow. Simple to install with 5" duct in walls or ceiling with 5-1/4" cutout. Screws are visible when installed.

• RV Vents and Fans
• Vent
• Ceiling Vent
• Wall Vent
• No Fan
• Plastic
• White
• B and B Molders

Direct water away from your RV with this long-length gutter spout that drains water farther away from your RV, avoiding those unsightly black streaks. Fits all rain gutter rails up to 1-1/16" wide. Easy to install.

• RV Trim
• Gutter Parts
• Black
• B and B Molders

You're walking around your rig and spot the end of the trim line sticking out. The cap is missing, leaving the edge exposed to water and road spray. This return-style end cap with a molded step finishes off the run and blends in with your trim.

• RV Slide Out Parts
• Caps and Covers
• End Cap
• Bolt-On
• White
• B and B Molders

Wireless HD camera kit with 7" monitor, rear camera, and side marker light cameras provides expanded front, rear, and side visibility with DVR recording and up to four paired cameras

• RV Camera System
• Observation Camera
• Backup Camera
• Mirrored Image
• Waterproof
• Built-In Microphone
• Night Vision
• Wireless
• 110 Degrees
• Suction Cup Mount
• 7 Inch Display
• 4 Cameras
• Brandmotion

You've parked for the night and just want to relax. This ceiling vent helps set the tone, quietly moving air where you need it and blending in like it was always there. The comfort it brings makes your RV feel more like home.

• RV Vents and Fans
• Vent
• Ceiling Vent
• No Fan
• Plastic
• White
• B and B Molders

Update your RV's fresh-water access with this dual-fill secure hatch. Includes a gravity port to fill your fresh-water tank and a threaded brass check valve for pressurized city water. Vent allows air into your tank so water flows smoothly.

• RV Water Inlets
• Gravity Fill Inlet
• City Fill Inlet
• Flush Mount
• 1-1/2 Inch Deep
• Plastic
• Brass
• White
• B and B Molders

Maintain your RV's black tank with this surface mounted tank flusher water inlet. Use a city water hose with the open plastic valve for a more effective cleaning process. Removable screen filter keeps debris out. 1/2" MPT water connection.

• RV Water Inlets
• City Fill Inlet
• Surface Mount
• 1-1/2 Inch Diameter Cutout
• 1-11/16 Inch Deep
• Plastic
• Plastic
• White
• B and B Molders

You're checking the inside corner of the slide-out and spot the trim joint exposed. The cover's missing, and now there's a gap catching dust and grime. This replacement covers it up and blends right in with the trim.

• RV Slide Out Parts
• Caps and Covers
• Inside Corner
• Bolt-On
• White
• B and B Molders

It's stressful when your vehicle is packed to the roof and you can't see what's going on behind you. This digital rear view mirror restores that view and records video, so if anything happens, you've got proof to protect yourself.

• Backup Camera
• Backup Camera Systems
• Third Brake Light Camera System
• Hardwired
• 170 Degrees
• Rearview Mirror Monitor
• Replaces Existing Mirror
• Brandmotion

Improve the look and integrity of your RV's slide-out room with this molded plastic cover. The curved shape of this piece adds some style but also protects and prevents water from entering the crease where trim panels meet. Easy to install.

• RV Slide Out Parts
• Caps and Covers
• Curved Corner
• Bolt-On
• White
• B and B Molders

Exchanging stale air for fresh is crucial to enjoying your RV this season. Grille is removable for filter changes, snapping in and out easily, while also covering the mounting screws. The 13" x 6" filter can be handwashed and replaced.

• RV Vents and Fans
• Vent
• Return Air Grille
• No Fan
• Plastic
• Black
• B and B Molders

Set-up your RV's black water tank with this projected flush slip fitting. The fitting is designed for solvent welding to your tank once a hole is drilled. Your fitting requirements are dictated by your water set-up. Made with durable ABS plastic.

• RV Sewer Hose Fittings
• Sewer Seals and Gaskets
• Waste Tank
• B and B Molders

Towing a trailer means you can't afford to guess what's behind you. This custom fit system puts live views of your bed and trailer on a digital rear view mirror, so you always know what's back there before you change lanes or park.

• Backup Camera
• Backup Camera Systems
• Third Brake Light Camera System
• Wireless
• 155 Degrees
• Rearview Mirror Monitor
• Replaces Existing Mirror
• Brandmotion

It's stressful when your vehicle is packed to the roof and you can't see what's going on behind you. This digital rear view mirror restores that view and records video, so if anything happens, you've got proof to protect yourself.

• Backup Camera
• Backup Camera Systems
• Standard Camera System
• Hardwired
• 170 Degrees
• Rearview Mirror Monitor
• Replaces Existing Mirror
• Brandmotion

You're up on the ladder checking your slide-out and notice the corner is exposed. The square cover is gone, and now water's got a direct shot into the seam. This replacement squares it off, seals the joint, and blends right in with the trim.

• RV Slide Out Parts
• Caps and Covers
• Square Corner
• Bolt-On
• Gray
• B and B Molders

You can't stop the rain, but you can control where it goes. These gutter spouts guide water away from your rig so it doesn't leave streaks down the side or puddles by the door. A small fix that makes a clear difference when the weather turns.

• RV Trim
• Gutter Parts
• Beige
• B and B Molders