New Arrivals

This hitch head has a 4" extended drop to ensure a level, stable tow for your lifted truck or low-riding trailer. Replaces the hitch head for your B&W Continuum weight distribution system.

• Accessories and Parts
• Weight Distribution Hitch
• Head
• Trunnion Bar
• B and W

Replace a lost or damaged bracket or install one in a second vehicle to easily transfer your Curt NEXT brake controller. The low-profile design installs above or below the dash and includes multiple mounting options for a secure, unobtrusive fit.

• Accessories and Parts
• Trailer Brake Controller
• Mounting Hardware
• Brackets
• CURT

For heavy-duty applications that require cable, this steel winch cable has a break strength of 5,600 lbs and a working load limit of 1,865 lbs.

• Accessories and Parts
• Electric Winch
• Trailer Winch
• Cables and Straps
• 7/32 Inch Diameter
• 5600 lbs
• Wire Rope
• CURT

Replaces the 2-5/16" and 2" combo hitch ball for your Andersen EZ heavy-duty adjustable ball mount or weight distribution system. Includes combo ball and 2 pins and clips.

• Accessories and Parts
• Trailer Hitch Ball Mount
• Drop Hitch
• Balls
• Dual Ball
• 2 Inch Ball
• 2-5/16 Inch Ball
• Andersen

This tire change kit makes swapping out a flat on your multi-axle trailer a total breeze. Just drive the good tire up onto the leveler to raise the adjacent tire up to 4" off the ground. You will be back on the road in no time.

• Wheel Chocks
• Accessories and Parts
• Trailer Tires and Wheels
• Tire Change Jack
• Andersen

Need more slack in your Andersen weight-distribution tension chains? Add up to 11-1/4" instantly with these extensions6 links plus a threaded coupler per side. Remove any links you dont need for a custom fit and smoother hitch setup.

• Accessories and Parts
• Weight Distribution Hitch
• Chains
• Andersen

You're lining up the fifth wheel, solo in the driveway, no spotter this time. With one try, it clicks into place. You step out, check the connection, and smile. That funnel did exactly what it promised.

• Accessories and Parts
• 5th Wheel Hitch
• Gooseneck Coupler Adapter
• Andersen

Eliminate the need for blocks with this trailer jack foot designed for XO750 Ark Xtreme off-road jacks. Foot stand extends your jack height, and protects your tires from compressing over prolonged storage times. Increases jack height by 3".

• Accessories and Parts
• Trailer Jack
• Jack Foot
• Ark

This oversized mounting plate covers gaps or holes when installing a Coleman-Mach digital wall thermostat. It provides a clean, finished look and works with models 9420-381 and 9420-382.

• Accessories and Parts
• RV Air Conditioners
• Thermostat
• Mounting Plates
• Coleman-Mach

Restore connectivity between your switch panel and RV generator with this 10-foot Cummins Onan adapter harness. Designed for use with remote start/stop control panels on HGJBB, KY, and HGJAx model generators.

• Accessories and Parts
• Generators
• Wiring Harness
• Cummins Onan

You're swapping out your RV's AC and need a distribution box to match. Open the louvers for cool air directed straight into the cabin, or close them to push air through existing ducts. Includes a filter that pops out for a quick rinse.

• Accessories and Parts
• RV Air Conditioners
• Air Distribution Box
• White
• Coleman-Mach

You're replacing your RV's AC and need a non-ducted ceiling assembly with built-in controls. This unit adds front and rear airflow dampers, pop-out filters, and heat strip prep. Designed for Coleman-Mach systems. Other parts required.

• Accessories and Parts
• RV Air Conditioners
• Air Distribution Box
• White
• Coleman-Mach

You're replacing your RV's AC and need a ceiling assembly that puts you in control. This non-ducted air distribution box has built-in knobs, adjustable louvers, and a pop-out filter. Designed for Coleman-Mach systems. Other parts required.

• Accessories and Parts
• RV Air Conditioners
• Air Distribution Box
• White
• Coleman-Mach

Turn your Coleman-Mach underbunk AC unit into a true comfort system. This kit adds a thermostat, remote, ducting, vents, and hardware so you can control temps and route your airflow exactly where you need it.

• Accessories and Parts
• RV Air Conditioners
• Remote Control
• Thermostat
• Coleman-Mach

You're replacing your RV's thermostat and need a digital controller that works with your Coleman-Mach single-zone system. This is the thermostat only, but you can pair it with a compatible rooftop AC and ceiling assembly to finish your setup.

• Accessories and Parts
• RV Air Conditioners
• Thermostat
• Black
• Coleman-Mach

Replace the worn or non-working switch panel on your Cummins Onan generator. This panel lets you start and stop your gas or LP generator from a central location and works with select HGJBB, KY, and HGJAx models.

• Accessories and Parts
• Generators
• Switch Panel
• Cummins Onan

This electric heater kit fits your medium or low-profile Coleman Mach RV air conditioner.

• Accessories and Parts
• RV Air Conditioners
• Heat Strip
• Coleman-Mach

Need a no-nonsense lug nut? This zinc-plated open-end acorn lug nut gives you a secure fit without the fuss. Built tough to resist rust and wear, it won't trap moisture and works great with longer wheel studs.

• Accessories and Parts
• Trailer Tires and Wheels
• Golf Cart Tires and Wheels
• Boat Trailer Wheels
• Wheel Lug Nut
• 1/2 Inch Wheel Bolt
• Acorn Nut
• 60-Degree Cone
• Zinc-Plated Steel
• DeeMaxx

Replace a missing or damaged caliper bracket on your DeeMaxx 6K disc brake assembly. Designed for use with integral and slip-over rotors, this bracket features DeeMaxxs corrosion-resistant MAXX coating for long-lasting durability.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• 6000 lbs
• Hardware
• Caliper Parts
• Mounting Brackets
• DeeMaxx

Secure your stainless steel brake lines with this silicone-lined clamp. The yellow silicone cushion prevents damage from vibration, while the stainless steel construction resists rust and corrosion. Fits 1/4" braided stainless steel brake lines.

• Accessories and Parts
• Brake Actuator
• Trailer Brakes
• Hydraulic Drum Brakes
• Disc Brakes
• Brake Lines
• Brake Line Components
• DeeMaxx

This replacement caliper has all the features you've come to know and love from your current DeeMaxx brake assemblies. The Maxx coating is even better than Dacromet for superior corrosion protection. Includes stainless steel backing plates.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• 6000 lbs
• 3500 lbs
• Caliper Parts
• Caliper
• DeeMaxx

Need a tough, reliable connection from your actuator to the main brake lines? The non-stick polymer core locks in pressure, while braided stainless steel fends off road debris. No ballooning, no leaks, just reliable stopping power.

• Accessories and Parts
• Trailer Brakes
• Brake Actuator
• Disc Brakes
• Hydraulic Drum Brakes
• 5 Feet Long
• Brake Lines
• Brake Line Components
• DeeMaxx

You're trying to link your brake actuator to your brake line tab, but a straight hose hits the frame. This 24" line makes the first turn with a 90-degree fitting that keeps the hose aligned and seated without binding.

• Accessories and Parts
• Trailer Brakes
• Brake Actuator
• Disc Brakes
• Hydraulic Drum Brakes
• 2 Feet Long
• Brake Lines
• Brake Line Components
• DeeMaxx

This stainless steel acorn lug nut laughs in the face of rust. Perfect for saltwater use, it stays strong and rust-free. No chipping, no peeling, just a tough, reliable fit that shrugs off moisture, salt, and road grime for the long haul.

• Accessories and Parts
• Boat Trailer Wheels
• Trailer Tires and Wheels
• Golf Cart Tires and Wheels
• Wheel Lug Nut
• 1/2 Inch Wheel Bolt
• Acorn Nut
• 60-Degree Cone
• Stainless Steel
• DeeMaxx