Pacbrake's air suspension spacer kits allow your lifted truck to get all the benefits of air suspension / air springs while still keeping your truck at its desired height.
Give your 2021-2023 Ford Bronco 4WD an aggressive stance with a 2" leveling kit from Pacbrake. Instantly transforms the look of your vehicle while maintain a smooth factory ride. A small lift can really make a huge difference.
Lifting your rig can push your coil springs to the limit - literally. This rear bump stop spacer kit helps prevent the springs from going solid at full compression, protecting your ride quality and suspension components.
Lifting the front of your rig or adding weight can push your coils to the limit. This front bump stop spacer kit helps prevent overstressing the springs - protecting ride quality and suspension longevity.
Lifting your suspension can lead to bottomed-out shocks if the bump stops aren't adjusted. This spacer kit helps limit suspension compression, protecting your shocks from damage when the trail gets rough.
After a lift, your steering can feel twitchy or off-center, like your rig just won't hold a straight line. This caster kit adds 2 degrees of positive caster through a set of press-in bushings, helping your front end feel planted again.
Pacbrake's air suspension spacer kits allow your lifted truck to get all the benefits of air suspension / air springs while still keeping your truck at its desired height.
After a lift, your steering can feel twitchy or off-center, like your rig just won't hold a straight line. This caster kit adds 2 degrees of positive caster through a set of press-in bushings, helping your front end feel planted again.
When coil springs compress too far, they can go solid, causing a harsh ride and potential damage. This rear bump stop spacer kit limits travel just enough to keep your springs working like they should, even when fully loaded.
Adding bigger tires? Without the right bump stop spacing, your shocks can go solid on full compression. This front spacer kit helps protect your shocks and keeps your suspension working safely - even with upsized tires.
Lifting your rear suspension can pull the driveshaft too far from the diff flange, causing vibration or poor engagement. This spacer restores the right fit, so your driveshaft stays secure and runs smooth.
Lifting the rear suspension can throw off your driveline angle - and that often leads to vibration. This rear driveline spacer kit helps realign the driveshaft and smooth out your ride before small problems become big ones.
Lifting the rear suspension can throw off your driveline angle - and that often leads to vibration. This rear driveline spacer kit helps realign the driveshaft and smooth out your ride before small problems become big ones.
After lifting your rig, the steering can feel vague or wander on the highway. This caster correction kit brings your front-end geometry back in line, restoring stability and helping your vehicle track straight again.
After a lift, poor alignment can mess with both your steering and your driveline. This kit dials in front caster and rear pinion angleso your rig tracks straight and your drivetrain runs smooth.
After a lift, your front end can feel loose or wander at speed. This caster correction kit adds 2 degrees of positive caster, helping your steering feel more stable and centered - just like it should.
Lifting your suspension can lead to bottomed-out shocks if the bump stops aren't adjusted. This spacer kit helps limit suspension compression, protecting your shocks from damage when the trail gets rough.
A lift can throw your steering geometry out of spec - leaving your rig with vague tracking and uneven tire wear. This caster correction kit brings your front end back into alignment with up to 4 degrees of added caster.
After a lift, your front driveshaft can get uncomfortably close to the crossmember, especially at full droop. This spacer kit creates the clearance you need to protect your driveline on rough terrain or full flex.
Filter Results
