Pacbrake's air suspension spacer kits allow your lifted truck to get all the benefits of air suspension / air springs while still keeping your truck at its desired height.
This Tacoma Spacer kit may be required with the purchase of HP10328 Pacbrake Air Spring Kit (sold separately) compatible with Toyota Tacoma / PreRunner.
Give your 2021-2023 Ford Bronco 4WD an aggressive stance with a 2" leveling kit from Pacbrake. Instantly transforms the look of your vehicle while maintain a smooth factory ride. A small lift can really make a huge difference.
Lifting your rig can push your coil springs to the limit - literally. This rear bump stop spacer kit helps prevent the springs from going solid at full compression, protecting your ride quality and suspension components.
Lifting the front of your rig or adding weight can push your coils to the limit. This front bump stop spacer kit helps prevent overstressing the springs - protecting ride quality and suspension longevity.
Lifting your suspension can lead to bottomed-out shocks if the bump stops aren't adjusted. This spacer kit helps limit suspension compression, protecting your shocks from damage when the trail gets rough.
Pacbrake's air suspension spacer kits allow your lifted truck to get all the benefits of air suspension / air springs while still keeping your truck at its desired height.
Lifting the front of your truck changes the angle of the radius arms - pulling on brake lines and throwing off suspension geometry. Drop brackets correct the angles and protect your brake lines from stretching too far on the trail.
Adding bigger tires? Without the right bump stop spacing, your shocks can go solid on full compression. This front spacer kit helps protect your shocks and keeps your suspension working safely - even with upsized tires.
After a lift, your steering can feel twitchy or off-center, like your rig just won't hold a straight line. This caster kit adds 2 degrees of positive caster through a set of press-in bushings, helping your front end feel planted again.
Lifting your suspension can lead to bottomed-out shocks if the bump stops aren't adjusted. This spacer kit helps limit suspension compression, protecting your shocks from damage when the trail gets rough.
After a lift, your steering can feel twitchy or off-center, like your rig just won't hold a straight line. This caster kit adds 2 degrees of positive caster through a set of press-in bushings, helping your front end feel planted again.
Lifting the front of your truck changes the angle of the radius arms - pulling on brake lines and throwing off suspension geometry. Drop brackets correct the angles and protect your brake lines from stretching too far on the trail.
When coil springs compress too far, they can go solid, causing a harsh ride and potential damage. This rear bump stop spacer kit limits travel just enough to keep your springs working like they should, even when fully loaded.
Fitting an OME panhard rod doesn't always line up with factory mounts - especially after a lift. This bracket helps correct positioning, making sure your axle stays centered and your handling stays tight.
Even a small suspension lift can throw off driveline angles and cause vibration. A gearbox packer corrects that misalignment, reducing shake and helping your rig feel smooth again, on the trail or at highway speed.
After lifting your rig, the steering can feel vague or wander on the highway. This caster correction kit brings your front-end geometry back in line, restoring stability and helping your vehicle track straight again.
After a lift, your front driveshaft can get uncomfortably close to the crossmember, especially at full droop. This spacer kit creates the clearance you need to protect your driveline on rough terrain or full flex.
Filter Results
