After a lift, your front end can feel loose or wander at speed. This caster correction kit adds 2 degrees of positive caster, helping your steering feel more stable and centered - just like it should.
After a lift, the factory panhard rod bracket may no longer sit at the right angle. This bracket kit helps you fit an OME panhard rod properly - so your axle stays centered and your suspension works the way it should.
After a lift, poor alignment can mess with both your steering and your driveline. This kit dials in front caster and rear pinion angleso your rig tracks straight and your drivetrain runs smooth.
A lift can throw your steering geometry out of spec - leaving your rig with vague tracking and uneven tire wear. This caster correction kit brings your front end back into alignment with up to 4 degrees of added caster.
Even a small suspension lift can throw off driveline angles and cause vibration. A gearbox packer corrects that misalignment, reducing shake and helping your rig feel smooth again, on the trail or at highway speed.
Lifting your rig can throw your axle off-center, especially in the rear. This extension bracket helps correct panhard rod angles - restoring axle alignment and handling when fitting an OME rod on a left-hand drive vehicle.
Even a small suspension lift can throw off driveline angles and cause vibration. A gearbox packer corrects that misalignment, reducing shake and helping your rig feel smooth again, on the trail or at highway speed.
Lifting the rear suspension can throw off your driveline angle - and that often leads to vibration. This rear driveline spacer kit helps realign the driveshaft and smooth out your ride before small problems become big ones.
Fitting an OME panhard rod doesn't always line up with factory mounts - especially after a lift. This bracket helps correct positioning, making sure your axle stays centered and your handling stays tight.
Even a small suspension lift can throw off driveline angles and cause vibration. A gearbox packer corrects that misalignment, reducing shake and helping your rig feel smooth again, on the trail or at highway speed.
After lifting your rig, the steering can feel vague or wander on the highway. This caster correction kit brings your front-end geometry back in line, restoring stability and helping your vehicle track straight again.
After a lift, your front driveshaft can get uncomfortably close to the crossmember, especially at full droop. This spacer kit creates the clearance you need to protect your driveline on rough terrain or full flex.
Even a small suspension lift can throw off driveline angles and cause vibration. A gearbox packer corrects that misalignment, reducing shake and helping your rig feel smooth again, on the trail or at highway speed.
Lifting your rear suspension can pull the driveshaft too far from the diff flange, causing vibration or poor engagement. This spacer restores the right fit, so your driveshaft stays secure and runs smooth.
This Tacoma Spacer kit may be required with the purchase of HP10328 Pacbrake Air Spring Kit (sold separately) compatible with Toyota Tacoma / PreRunner.
This Tacoma Spacer kit may be required with the purchase of HP10328 Pacbrake Air Spring Kit (sold separately) compatible with Toyota Tacoma / PreRunner.
Pacbrake's air suspension spacer kits allow your lifted truck to get all the benefits of air suspension / air springs while still keeping your truck at its desired height.
WOW! I am impressed! I called to place my order and real person answered, spoke perfect English, albeit a slight southern accent, and my order was sent within a day, shipped quickly and I had it a few days later. I saved over a hundred dollars over local and installed it my self. I cant imagine how that they could do any better. THANKS!
Filter Results
