You're ready to ride, but is your battery? This eyelet cable gives you an instant read on your battery's health with a simple LED system. A quick glance tells you if it's good to go or needs a charge - before you're stuck.
Your battery is out of sight, and now it's out of power. The indicator pigtail converts your SAE quick connector into a real-time battery monitor, so you always know when it's time to charge. The LEDs let you check your battery at a glance.
Make it easier to reach your winch control plug with a 3' extension cord. Lets you plug in your wired controller even if your winch is mounted in a hard to reach location.
Plug in Peterson LED lights fast with this AMP-style pigtail. Blunt-cut leads give you wiring flexibility, and the 7-3/4" length makes routing easy. Seals tight for a weather-resistant connection you can trust on every haul.
Y-Type splitter cable with ARB's 5-pin connectors allows up to 4 Solis lights to be controlled from one switch pad or the LINX system. If you want lights installed with (1) 5-setting switch pad, you need this splitter for safe, optimal operation.
You're on the road, miles from an outlet, and your CS Free charger is running low. The 12V plug lets you recharge directly from your vehicle's 12V socket, so your charger is always ready when you need it. Just plug in and power up - anywhere.
You go to charge your battery only to realize your charger won't reach. This extension cable gives you an extra 8' of flexibility, so you can position your charger where it works best. No more stretching cables or parking at odd angles.
Wiring a winch can be frustrating without the right cables. This ARB fitting cable kit gives you pre-terminated leads, making your install cleaner, faster, and more reliable.
If your start battery and secondary battery are close to each other in your engine bay, this wiring kit gives you everything you need to make connections with your Redarc Alpha 25A DC battery charger.
Filter Results
