New Arrivals

Keep your trailer plug off the ground and out of the dirt with this holder. Secures to your trailer and gives you a spot to clip your breakaway cable when it's not in use. Fits 7-way plug.

• Accessories and Parts
• Trailer Wiring
• Wiring
• Custom Fit Vehicle Wiring
• Plug Holder
• ESCO

When you bleed pressure just to swap tools or close a line, you lose time waiting for your compressor to recover. This in-line valve lets you shut things off with a quarter turn and hold pressure in the system so you can keep working.

• Accessories and Parts
• On Board Air Compressor
• Tire Inflator
• Vehicle Suspension
• Air Bag Compressor Kit
• Valves
• Bulldog Winch

Some valve stems are tucked behind a fender or sit at a weird angle. This short, flexible hose gives you a little slack at the valve so you can connect the chuck without bending the main line or working at an awkward angle.

• Accessories and Parts
• Tire Inflator
• Valves
• Air Chuck
• Bulldog Winch

Some air chucks leak or pop off unless you hold them in place. This one pushes on and locks down so you can let go while the tire inflates. The internal shut-off keeps air in the system when it's not connected to a valve.

• Accessories and Parts
• Tire Inflator
• Valves
• Air Chuck
• Bulldog Winch

Some valve stems are buried deep or sit at the wrong angle for a standard chuck. This dual-head chuck with a flexible hose gives you the reach and angle you need to push the chuck onto the valve and fill the tire, even in tight spots.

• Accessories and Parts
• Air Bag Compressor Kit
• Tire Inflator
• On Board Air Compressor
• Vehicle Suspension
• Valves
• Air Chuck
• Bulldog Winch

You've got a compressor mounted in your truck or set up in the shop, so you're not about to move it. This hose lets you air up tires or run pneumatic tools up to 30 feet away. Works with most compressors using 1/4" connections.

• Accessories and Parts
• Vehicle Suspension
• Tire Inflator
• Air Bag Compressor Kit
• On Board Air Compressor
• Air Compressor Parts
• Hoses
• Bulldog Winch

Repairs the latching mechanism in your BedSlide truck bed slide. Works with all BedSlides made between 2010 and 2013. Kit includes 2 lock pins, 2 springs, 2 hairpin clips, and instructions.

• Accessories and Parts
• Truck Bed Slide
• Latches
• BedSlide

Need a no-nonsense lug nut? This zinc-plated open-end acorn lug nut gives you a secure fit without the fuss. Built tough to resist rust and wear, it won't trap moisture and works great with longer wheel studs.

• Accessories and Parts
• Trailer Tires and Wheels
• Golf Cart Tires and Wheels
• Boat Trailer Wheels
• Wheel Lug Nut
• 1/2 Inch Wheel Bolt
• Acorn Nut
• 60-Degree Cone
• Zinc-Plated Steel
• DeeMaxx

Replace a missing or damaged caliper bracket on your DeeMaxx 6K disc brake assembly. Designed for use with integral and slip-over rotors, this bracket features DeeMaxxs corrosion-resistant MAXX coating for long-lasting durability.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• 6000 lbs
• Hardware
• Caliper Parts
• Mounting Brackets
• DeeMaxx

Secure your stainless steel brake lines with this silicone-lined clamp. The yellow silicone cushion prevents damage from vibration, while the stainless steel construction resists rust and corrosion. Fits 1/4" braided stainless steel brake lines.

• Accessories and Parts
• Brake Actuator
• Trailer Brakes
• Hydraulic Drum Brakes
• Disc Brakes
• Brake Lines
• Brake Line Components
• DeeMaxx

This replacement caliper has all the features you've come to know and love from your current DeeMaxx brake assemblies. The Maxx coating is even better than Dacromet for superior corrosion protection. Includes stainless steel backing plates.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• 6000 lbs
• 3500 lbs
• Caliper Parts
• Caliper
• DeeMaxx

Need a tough, reliable connection from your actuator to the main brake lines? The non-stick polymer core locks in pressure, while braided stainless steel fends off road debris. No ballooning, no leaks, just reliable stopping power.

• Accessories and Parts
• Trailer Brakes
• Brake Actuator
• Disc Brakes
• Hydraulic Drum Brakes
• 5 Feet Long
• Brake Lines
• Brake Line Components
• DeeMaxx

You're trying to link your brake actuator to your brake line tab, but a straight hose hits the frame. This 24" line makes the first turn with a 90-degree fitting that keeps the hose aligned and seated without binding.

• Accessories and Parts
• Trailer Brakes
• Brake Actuator
• Disc Brakes
• Hydraulic Drum Brakes
• 2 Feet Long
• Brake Lines
• Brake Line Components
• DeeMaxx

This stainless steel acorn lug nut laughs in the face of rust. Perfect for saltwater use, it stays strong and rust-free. No chipping, no peeling, just a tough, reliable fit that shrugs off moisture, salt, and road grime for the long haul.

• Accessories and Parts
• Boat Trailer Wheels
• Trailer Tires and Wheels
• Golf Cart Tires and Wheels
• Wheel Lug Nut
• 1/2 Inch Wheel Bolt
• Acorn Nut
• 60-Degree Cone
• Stainless Steel
• DeeMaxx

Replaces the caliper-mounting bracket for your DeeMaxx 7,000-lb, 13" hub-and-rotor and slip-over disc brakes with 5 bolt flange.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• 7000 lbs
• Hardware
• Caliper Parts
• Mounting Brackets
• DeeMaxx

Replaces 1 spacer for your 11" bolt on rotor on your 10K, 12K, or 16K disc brake kit.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• Rotors
• Rotor Spacers
• DeeMaxx

Replaces the stainless steel nut for your 7K DeeMaxx disc brake bracket. 3/8"-16

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• Hardware
• Nuts
• DeeMaxx

Running a brake line from your actuator to the frame or junction tee? This hose gives you 6' of reach with straight brass flare fittings at both ends, so you can span longer sections or replace a worn hose without needing adapters.

• Accessories and Parts
• Brake Actuator
• Trailer Brakes
• Hydraulic Drum Brakes
• Disc Brakes
• 6 Feet Long
• Brake Lines
• Brake Line Components
• DeeMaxx

Need a no-nonsense lug nut? This zinc-plated open-end acorn lug nut gives you a secure fit without the fuss. Built tough to resist rust and wear, it won't trap moisture and works great with longer wheel studs.

• Accessories and Parts
• Boat Trailer Wheels
• Golf Cart Tires and Wheels
• Trailer Tires and Wheels
• Wheel Lug Nut
• 5/8 Inch Wheel Bolt
• Acorn Nut
• 60-Degree Cone
• Zinc-Plated Steel
• DeeMaxx

Secure your rubber brake lines with this silicone-lined clamp. The black silicone cushion prevents damage from vibration, while the stainless steel construction resists rust and corrosion. Fits 3/8" rubber brake lines.

• Accessories and Parts
• Brake Actuator
• Trailer Brakes
• Hydraulic Drum Brakes
• Disc Brakes
• Brake Lines
• Brake Line Components
• DeeMaxx

Replaces the stainless steel bolt for your 8K DeeMaxx disc brake bracket. 1/2"-20 X 1-1/2"

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• Hardware
• Bolts
• DeeMaxx

Need a solid replacement lug nut? This chrome acorn lug nut keeps your wheels snug and secure. The closed-end bulge design ensures a tight fit, while the chrome finish stands up to rust and road grime for the long haul.

• Accessories and Parts
• Trailer Tires and Wheels
• Boat Trailer Wheels
• Golf Cart Tires and Wheels
• Wheel Lug Nut
• 9/16 Inch Wheel Bolt
• Acorn Nut
• 60-Degree Cone
• Chrome-Plated Steel
• DeeMaxx

Your brake actuator sits further back than expected, and a short hose wont reach. This 78" line gives you more length and a 90-degree fitting that clears the frame without pulling at the connection.

• Accessories and Parts
• Brake Actuator
• Trailer Brakes
• Disc Brakes
• Hydraulic Drum Brakes
• 6-1/2 Feet Long
• Brake Lines
• Brake Line Components
• DeeMaxx

Replace a damaged or stripped stud on your 8K or 12K DeeMaxx hub with this heavy-duty 5/8"-18 press-fit stud. Measures 3.06" long overall. Works with hub and hub-rotor assemblies. Built for high-load trailers. Sold individually.

• Accessories and Parts
• Boat Trailer Wheels
• Trailer Hubs and Drums
• Trailer Tires and Wheels
• Wheel Studs
• 5/8 Inch Diameter
• Drive-In Stud
• DeeMaxx