New Arrivals

Passenger's-side 10" x 2-1/4" hydraulic drum brake assembly features a free-backing design for smooth reversing. Fits 3,500-lb axles with 13" to 15" wheels and mounts with a 4-bolt flange.

• Accessories and Parts
• Trailer Brakes
• Hydraulic Drum Brakes
• RH
• 3500 lbs
• Brake Assembly
• 10 x 2-1/4 Inch Drum
• Dexter

Replaces the cap for your Dexter 12V KTI hydraulic pump reservoir. Fits DC-4419 and DC45520.

• Accessories and Parts
• Dump Trailer Parts
• Hydraulic Pumps
• Caps
• Dexter Axle

Replace or add a reverse lockout solenoid to your surge brake actuator from Dexter or Tie Down Engineering to keep the actuator from activating your trailer brakes when you shift into reverse.

• Accessories and Parts
• Brake Actuator
• Disc Brakes
• Hydraulic Drum Brakes
• Solenoid
• Dexter

This brake assembly is engineered for trailers with 9,000 to 10,000 lbs. axles. Its self-adjusting to ensure optimal braking efficiency with minimal maintenance. The integrated parking brake lever adds convenience and safety.

• Accessories and Parts
• Trailer Brakes
• Hydraulic Drum Brakes
• RH
• 10000 lbs
• 9000 lbs
• Brake Assembly
• 12-1/4 x 3-3/8 Inch Drum
• Dexter

Restore the performance of your Fortress oil cap with this complete service kit. Includes rubber plugs, oil fill plugs, and O-ring seals to prevent leaks, maintain pressure, and keep your hub looking squeaky clean.

• Accessories and Parts
• Trailer Bearings Races Seals Caps
• Service Kit
• Dexter

Replace a worn or leaking copper washer on your Dexter disc brake caliper. This 7/16" crush washer provides a tight, reliable seal between the banjo fitting and caliper to help prevent brake fluid leaks in your hydraulic braking system.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• Hardware
• Caliper Parts
• Washers
• Dexter

Driver's-side 10" x 2-1/4" hydraulic drum brake assembly features a free-backing design for smooth reversing. Fits 3,500-lb axles with 13" to 15" wheels and mounts with a 4-bolt flange.

• Accessories and Parts
• Trailer Brakes
• Hydraulic Drum Brakes
• LH
• 3500 lbs
• Brake Assembly
• 10 x 2-1/4 Inch Drum
• Dexter

This replacement inner member slide easily fits into the existing housing of your Dexter XR84 or Legacy UFP surge brake actuator. For use with triple-axle trailers with hydraulic disc brakes.

• Accessories and Parts
• Brake Actuator
• Disc Brakes
• Inner Member
• Dexter

Replaces the protective top cap on Dexter 12,000-lb hydraulic jack add-on with selector valve; keeps internal components shielded from debris and moisture.

• Accessories and Parts
• Trailer Jack
• Electric Winch
• Caps
• Dexter

Even one worn brake can make towing feel sketchy. Replacing a single ABS brake assembly brings back balanced braking and steadier control, so your trailer handles the way it should when traffic gets tight or the road gets steep.

• Accessories and Parts
• Trailer Brakes
• Electric Drum Brakes
• LH
• 7000 lbs
• Brake Assembly
• 12 x 2 Inch Drum
• Dexter

Keep your Dexter axle properly lubed with these press-in grease zerks. Designed for E-Z Lube and Nev-R-Lube axles, they let you easily attach a grease gun for routine maintenance. Measures 1/4" outer diameter x 5/16" length.

• Accessories and Parts
• Trailer Spindles
• Grease Zerk
• Dexter

Stay connected and in control. This direct replacement kit for Dexter Tow Assist includes the indicator light and Bluetooth adapter, restoring mirror visibility and live app updates so you always know how your trailer is responding.

• Accessories and Parts
• Trailer Brakes
• ABS System Wheel Sensor Parts
• Electric Drum Brakes
• Indicator Light
• Bluetooth Adapter
• Dexter

Restore your Dutton-Lainson StrongArm DC electric winch's functionality with this Switch Pocket Replacement Kit. Includes all necessary hardware for a complete and secure repair.

• Accessories and Parts
• Electric Winch
• Switches
• Dutton-Lainson

Replaces (1) 3/8" x 3" barbed air line T-Connector for your Demco Stay-IN-Play Duo supplemental braking system (SM99251 or SM99243).

• Accessories and Parts
• Flat Tow Brake System
• Air Lines
• Tees
• Demco

Replaces the short bed bracket for your Curt OEM puck system gooseneck ball kit (C60668 or C60663). Compatible with 2023-2025 GMC Sierra and Chevrolet Silverado trucks with 6.5' short beds.

• Accessories and Parts
• Trailer Hitch Ball
• Mounting Hardware
• Brackets
• CURT

Install your Curt electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port beneath your vehicle's dash.

• Accessories and Parts
• Trailer Brake Controller
• Wiring Adapter
• Plugs into Brake Controller
• Vehicle Specific
• CURT

Replace 2 worn or damaged backing plates on your single-axle trailer fender. Backing easily blocks water and road debris from hitting the side of your trailer.

• Accessories and Parts
• Trailer Fenders
• Fender Back
• CE Smith

Coupler repair kit contains all needed replacement parts for your CE Smith straight-tongue coupler with a 3,500-lb or 5,000-lb capacity, except for the coupler housing.

• Accessories and Parts
• Straight Tongue Trailer Coupler
• Coupler Repair
• CE Smith

If you're tired of steel brackets rusting out on your boat trailer, try this aluminum bracket. It's lightweight, durable, and won't rust, so your tail lights stay mounted season after season no matter where you launch.

• Accessories and Parts
• Trailer Lights
• Mounting Hardware
• Brackets
• CE Smith

This towing safety flag is ideal for your kayak, SUP, or anything else you want to tow and draw attention to. Made of Oxford fabric and nylon webbing, so it holds up for the long haul.

• Accessories and Parts
• Trailers
• Watersport Carriers
• Sports Trailer Parts
• Watersport Trailer Parts
• Safety Flag
• CE Smith

If you're tired of steel brackets rusting out on your boat trailer, try this aluminum bracket. It's lightweight, durable, and won't rust, so your tail lights stay mounted season after season no matter where you launch.

• Accessories and Parts
• Trailer Lights
• Mounting Hardware
• Brackets
• CE Smith

If you're tired of steel brackets rusting out on your boat trailer, try this aluminum bracket. It's lightweight, durable, and won't rust, so your tail lights stay mounted season after season no matter where you launch.

• Accessories and Parts
• Trailer Lights
• Mounting Hardware
• Brackets
• CE Smith

Bring your guide-on back to life with this genuine replacement post for your 22" pontoon post guide-on setup. Made from durable, white PVC, it drops right onto your existing brackets to get you back on the water faster.

• Accessories and Parts
• Boat Trailer Parts
• Guide-On Parts
• Posts
• White
• CE Smith

Rustproof, durable aluminum bracket lets you mount a tail light to your trailer frame.

• Accessories and Parts
• Trailer Lights
• Mounting Hardware
• Brackets
• CE Smith