New Arrivals

Want a safe way for your kids to get up into their bunk beds? This telescoping RV ladder has grooved steps to help make sure your child has secure footing as they're climbing. Once retracted, the ladder tucks away into one of the bunk beds.

• Telescoping Ladder
• RV Ladders
• Bunk Ladders
• Telescoping
• Hook-On
• Aluminum
• 250 lbs
• 6-3/4 Feet Tall
• Lippert

Replaces or upgrades 1 entry door hinge on your RV. Friction hinge holds the door open in any position instead of allowing the door to swing freely. 5-Leaf design. White color.

• RV Door Parts
• Entry Door
• Hinges
• Controlled Motion Hinge
• White
• Lippert

Replaces the gear motor assembly with pin and connector for your Lippert Components slide-out system.

• RV Slide Out Parts
• Motor Parts
• Motor
• Lippert Slide-Out Systems
• Lippert

Turn your RV into a gear-hauler with this Lippert 2" accessory hitch. Built for up to 66"-wide frames, it adds a universal receiver for bike racks, cargo trays & more. Strong, simple, and ready for the road - no towing required.

• RV and Camper Hitch
• Frame Mount Hitch
• 22 - 66 Inch Wide Frame
• 300 lbs TW
• Bolt-On
• Lippert

Includes the components needed to repair your Schwintek in-wall RV slide-out system.

• RV Slide Out Parts
• Roller Parts
• Roller
• Lippert In-Wall RV Slide-Out Systems
• Lippert

Replace your RV's old or damaged awning roller and fabric with this heavy-duty assembly. Fits Solera 15' power awnings with a built-in LED strip that extend 8' from your RV. Installs more easily than replacing just the fabric.

• RV Awnings
• Roller and Fabric Kits
• Extends 96 Inches
• White Fade
• Lippert

Replaces the aluminum hydraulic actuator for your through-frame RV slide-out. Includes a 41" stroke and a 1-1/2" bore.

• RV Slide Out Parts
• Motor Parts
• Actuator
• Lippert

Replace your RV's old or damaged awning roller and fabric with this heavy-duty assembly. Fits Solera 18' power awnings with a built-in LED strip that extend 8' from your RV. Installs more easily than replacing just the fabric.

• RV Awnings
• Roller and Fabric Kits
• Powered - 12V
• Extends 96 Inches
• Black Fade
• Lippert

Replaces the aluminum hydraulic actuator for your through-frame RV slide-out. Includes a 43" stroke and a 1-1/2" bore.

• RV Slide Out Parts
• Motor Parts
• Actuator
• Lippert

Replace a missing side plug on your Lippert Power Tongue Jack V2. Push-in rubber cover (1-3/8" OD) seals the jack-head opening to keep out water, dirt, and road grimerestoring full protection in seconds, no tools required.

• Lippert

Install this hub-and-drum assembly on your RV. Compatible with electric or hydraulic brakes. Fits Lippert 8,000-lb axles.Inner bearing (25580) and race, outer bearing (02475) and race, and grease seal included.

• Trailer Hubs and Drums
• Hub with Integrated Drum
• Pre-Greased
• 25580 / 02475
• Standard Grade
• For 8000 lbs Axles
• 8 on 6-1/2 Inch
• Lippert

Replace the leveling sensor wiring harness in your Lippert Hall Effect RV levelling system with this replacement right rear sensor harness.

• Accessories and Parts
• Camper Jacks
• Remote Receiver
• Lippert

Replaces the 3/8" x 2-1/8" pin for your Lippert Solera RV awning. Dacromet finish provides corrosion resistance.

• Accessories and Parts
• RV Awnings
• Hardware
• Pins
• Lippert

Mounts the front jacks of the Lippert Ground Control 3.0 to your motor home.

• Accessories and Parts
• Camper Jacks
• Hardware
• Bolts
• Lippert

Replaces the left or right support arm for your 10' wide Thule Omnistor 5200 motorized awning.

• Accessories and Parts
• RV Awnings
• Arms
• Support Arms
• Lippert

This kit replaces the roller assembly for your pop up camper.

• Accessories and Parts
• Camper Jacks
• Roller Assembly
• Lippert

A faulty harness can leave your leveling system unresponsive. Restore power and precision with this Deutsch 2-wire pigtail replacement. Designed for a secure fit, it ensures reliable connectivity so you can get back to smooth, worry-free operation.

• Accessories and Parts
• Camper Jacks
• Trailer Jack
• Wiring Harness
• Lippert

Lippert wiring harness connects your current Hall Effect to your 4-point or 6-point control board. Includes wiring harness only.

• Accessories and Parts
• Camper Jacks
• Wiring Harness
• Lippert

Cozy cover zips on and off your child's RV mattress to protect it from dirt and grimy food. Teddy-bear-like material is comfy enough for your child to sleep soundly during your trip. Fits mattresses 68" long x 30" wide x 3" tall.

• Accessories and Parts
• RV Mattress
• Mattress Covers
• Bunk
• Gray
• Lippert

Replaces (1) wear collar for your Lippert Solera RV awning. 3/8" Inner diameter, 1/2" outer diameter x 1/2" long.

• Accessories and Parts
• RV Awnings
• Hardware
• Wear Collar
• Lippert

A faulty harness can make your RV's leveling system unreliable. This replacement restores secure connections, ensuring smooth jack operation. Designed for Lippert Level-Up systems, it's an easy fix to get you back on the road with confidence.

• Accessories and Parts
• Trailer Jack
• Camper Jacks
• Wiring Harness
• Lippert

Replaces an 8-function reciever for your Lippert myRV electronic control system. Includes able fuses.

• Accessories and Parts
• Smart RV
• Receivers
• Lippert

Replaces the cartridge valve for your Lippert Flow Max kitchen or bathroom faucet.

• Accessories and Parts
• RV Faucets
• Cartridge
• Lippert

Repair your Lippert leveling system with this replacement hydraulic pump. The 1.2-gal reservoir keeps fluid flowing, while the 4-bank manifold distributes pressure. Pre-wired for easy installation, so you can get back to smooth, reliable leveling.

• Accessories and Parts
• Camper Jacks
• Trailer Jack
• Hydraulic Parts
• Pumps
• Lippert