New Arrivals

Make it easier to reach your winch control plug with a 3' extension cord. Lets you plug in your wired controller even if your winch is mounted in a hard to reach location.

• Accessories and Parts
• Electric Winch
• Wiring
• Extension
• Plugs
• Bulldog Winch

You've got a compressor mounted in your truck or set up in the shop, so you're not about to move it. This hose lets you air up tires or run pneumatic tools up to 30 feet away. Works with most compressors using 1/4" connections.

• Accessories and Parts
• Vehicle Suspension
• Air Bag Compressor Kit
• Tire Inflator
• On Board Air Compressor
• Air Compressor Parts
• Hoses
• Bulldog Winch

Repairs the latching mechanism in your BedSlide truck bed slide. Works with all BedSlides made between 2010 and 2013. Kit includes 2 lock pins, 2 springs, 2 hairpin clips, and instructions.

• Accessories and Parts
• Truck Bed Slide
• Latches
• BedSlide

Replace your lost or damaged Andersen 2-5/16" weight distribution hitch ball. Designed for use with Andersen weight distribution hitches, this replacement restores safe towing performance.

• Accessories and Parts
• Weight Distribution Hitch
• Balls
• Andersen

If your factory gooseneck hitch has a pop-in ball, this adapter is the missing piece to mount your Andersen Ultimate Connection Hitch and tow your 5th wheel. No adapter means no towing, so slap this bad boy in and hit the road with confidence.

• Accessories and Parts
• 5th Wheel Gooseneck Adapter
• Adapters
• Pop-In Ball
• Andersen

Get the height your setup needs with this 14" square coupler tube for your Andersen Ultimate Connection. Extra height helps level your setup, improve clearance, and deliver the smooth towing experience you're after. Mounting bolts included.

• Accessories and Parts
• 5th Wheel Gooseneck Adapter
• Coupler
• Andersen

Your trailer's wired right, but the brakes still won't fire. If your factory controller doesn't recognize your electric-over-hydraulic actuator, this adapter sends the signal it needs so the brakes activate, no rewiring required.

• Accessories and Parts
• Brake Actuator
• Hydraulic Drum Brakes
• Disc Brakes
• Adapters
• Deutsche Hydrapro

Restore connectivity between your switch panel and RV generator with this 10-foot Cummins Onan adapter harness. Designed for use with remote start/stop control panels on HGJBB, KY, and HGJAx model generators.

• Accessories and Parts
• Generators
• Wiring Harness
• Cummins Onan

You're swapping out your RV's AC and need a distribution box to match. Open the louvers for cool air directed straight into the cabin, or close them to push air through existing ducts. Includes a filter that pops out for a quick rinse.

• Accessories and Parts
• RV Air Conditioners
• Air Distribution Box
• White
• Coleman-Mach

You're replacing your RV's AC and need a non-ducted ceiling assembly with built-in controls. This unit adds front and rear airflow dampers, pop-out filters, and heat strip prep. Designed for Coleman-Mach systems. Other parts required.

• Accessories and Parts
• RV Air Conditioners
• Air Distribution Box
• White
• Coleman-Mach

Reduce your Coleman-Mach RV air conditioner's start-up power demand by up to 75% and ease the strain on your AC compressor. Start and run your AC smoothly without tripping breakers or overloading your generator.

• Accessories and Parts
• RV AC Soft Start
• RV
• Plug-In
• Single AC
• Coleman-Mach

You're replacing your RV's AC and need a ceiling assembly that puts you in control. This non-ducted air distribution box has built-in knobs, adjustable louvers, and a pop-out filter. Designed for Coleman-Mach systems. Other parts required.

• Accessories and Parts
• RV Air Conditioners
• Air Distribution Box
• White
• Coleman-Mach

Turn your Coleman-Mach underbunk AC unit into a true comfort system. This kit adds a thermostat, remote, ducting, vents, and hardware so you can control temps and route your airflow exactly where you need it.

• Accessories and Parts
• RV Air Conditioners
• Remote Control
• Thermostat
• Coleman-Mach

You're replacing your RV's thermostat and need a digital controller that works with your Coleman-Mach single-zone system. This is the thermostat only, but you can pair it with a compatible rooftop AC and ceiling assembly to finish your setup.

• Accessories and Parts
• RV Air Conditioners
• Thermostat
• Black
• Coleman-Mach

Replace the worn or non-working switch panel on your Cummins Onan generator. This panel lets you start and stop your gas or LP generator from a central location and works with select HGJBB, KY, and HGJAx models.

• Accessories and Parts
• Generators
• Switch Panel
• Cummins Onan

This electric heater kit fits your medium or low-profile Coleman Mach RV air conditioner.

• Accessories and Parts
• RV Air Conditioners
• Heat Strip
• Coleman-Mach

Replace a missing or damaged caliper bracket on your DeeMaxx 6K disc brake assembly. Designed for use with integral and slip-over rotors, this bracket features DeeMaxxs corrosion-resistant MAXX coating for long-lasting durability.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• 6000 lbs
• Hardware
• Caliper Parts
• Mounting Brackets
• DeeMaxx

Secure your stainless steel brake lines with this silicone-lined clamp. The yellow silicone cushion prevents damage from vibration, while the stainless steel construction resists rust and corrosion. Fits 1/4" braided stainless steel brake lines.

• Accessories and Parts
• Brake Actuator
• Trailer Brakes
• Hydraulic Drum Brakes
• Disc Brakes
• Brake Lines
• Brake Line Components
• DeeMaxx

This replacement caliper has all the features you've come to know and love from your current DeeMaxx brake assemblies. The Maxx coating is even better than Dacromet for superior corrosion protection. Includes stainless steel backing plates.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• 6000 lbs
• 3500 lbs
• Caliper Parts
• Caliper
• DeeMaxx

Need a tough, reliable connection from your actuator to the main brake lines? The non-stick polymer core locks in pressure, while braided stainless steel fends off road debris. No ballooning, no leaks, just reliable stopping power.

• Accessories and Parts
• Trailer Brakes
• Brake Actuator
• Disc Brakes
• Hydraulic Drum Brakes
• 5 Feet Long
• Brake Lines
• Brake Line Components
• DeeMaxx

You're trying to link your brake actuator to your brake line tab, but a straight hose hits the frame. This 24" line makes the first turn with a 90-degree fitting that keeps the hose aligned and seated without binding.

• Accessories and Parts
• Trailer Brakes
• Brake Actuator
• Disc Brakes
• Hydraulic Drum Brakes
• 2 Feet Long
• Brake Lines
• Brake Line Components
• DeeMaxx

This stainless steel acorn lug nut laughs in the face of rust. Perfect for saltwater use, it stays strong and rust-free. No chipping, no peeling, just a tough, reliable fit that shrugs off moisture, salt, and road grime for the long haul.

• Accessories and Parts
• Boat Trailer Wheels
• Trailer Tires and Wheels
• Golf Cart Tires and Wheels
• Wheel Lug Nut
• 1/2 Inch Wheel Bolt
• Acorn Nut
• 60-Degree Cone
• Stainless Steel
• DeeMaxx

Replaces the caliper-mounting bracket for your DeeMaxx 7,000-lb, 13" hub-and-rotor and slip-over disc brakes with 5 bolt flange.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• 7000 lbs
• Hardware
• Caliper Parts
• Mounting Brackets
• DeeMaxx

Replaces 1 spacer for your 11" bolt on rotor on your 10K, 12K, or 16K disc brake kit.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• Rotors
• Rotor Spacers
• DeeMaxx