New Arrivals

Tired of fighting with sticky bunks? Skip the carpet replacement with these marine slides from Caliber. They just screw over your carpet to help your boat glide off and onto the trailer with less strain, but let you keep the traditional look.

• Boat Trailer Parts
• Bunks
• Bunk Carpet
• Bunk Carpet Slides
• 3 Inch Wide
• 15 Inch Long
• Caliber

Studded tracks won't tear up the deck of your trailer with this kit installed. This mat adds some traction and protects your deck from water too, so you don't have to worry about rot. Includes installation hardware.

• Snowmobile Trailer Parts
• Traction Surface
• Traction Mats
• 54 Inch Long
• Caliber

This flooring protects your trailer or garage floor from your outdoor toys. And it protects your stuff by getting it off the floor and letting it air out. Snap together for a floating floor, or screw down for a partial floating or fixed floor.

• Utility Mat
• Trailer Flooring
• 18L x 9W Inch
• Plastic
• 9 Square Feet
• Black
• Caliber

A boat that refuses to slide is enough to ruin a good morning of fishing. Cutting drag with every launch, this low-maintenance bunk wrap lets your boat glide smoothly off and on your trailer, giving you more time on the water than at the ramp.

• Boat Trailer Parts
• Bunks
• Bunk Carpet
• 6 Inch Wide
• 16 Feet Long
• Caliber

Loading your snowmobile with these guides will be as satisfying as laying first tracks in fresh, untouched powder. Protects your sled and trailer from damage while loading. Interlocks so you can customize your setup.

• Snowmobile Trailer Parts
• Traction Surface
• Glides
• 8 Pack
• 10 Inch Long
• Caliber

This flooring protects your trailer or garage floor from your outdoor toys. And it protects your stuff by getting it off the floor and letting it air out. Snap together for a floating floor, or screw down for a partial floating or fixed floor.

• Trailer Flooring
• Utility Mat
• 18L x 9W Inch
• Plastic
• 27 Square Feet
• Gray
• Caliber

• Trailer Bearings Races Seals Caps
• Bearings
• Bearing Kits
• Standard Bearings
• 1.72 Inch I.D.
• Bearing LM67048 and L68149
• Race L68149 and L68111
• 4400 lbs Axle
• Dexter

Lost a grease cap on the road? It happens. Or maybe you just want to upgrade your caps. This kit gives you 2 chrome grease caps and plugs to keep your hubs sealed and your bearings happy. And the plug pops out for easy access - no mess, no fuss.

• Trailer Bearings Races Seals Caps
• Caps
• EZ Lube Grease Cap
• 2.45 Inch O.D.
• 6000 lbs Axle
• 5200 lbs Axle
• Dexter

Convenient kit contains everything you need to replace the bearings and seal on a single trailer hub: inner bearing (L68149) and outer bearing (L44649), inner race (L68111) and outer race (L44610), grease seal, and a cotter pin.

• Trailer Bearings Races Seals Caps
• Bearings
• Bearing Kits
• Bearing L44649 and L68149
• Race L68111 and L44610
• Dexter

Dump trailer power hoist lifts the trailer bed for easy unloading. Kit includes hydraulic power unit, hoist assembly, hoses, fittings, safety arm, battery cables, and hardware.

• Dump Trailer Parts
• Lifting System
• Power Hoist Kits
• Dexter Axle

Shuddering brakes, trailer sway, or grinding under load? Worn drums and bearings put safety at risk. An ABS-ready hub built for Dexter's Tow Assist restores smooth braking, steady tracking, and the peace of mind to tow without second-guessing.

• Trailer Hubs and Drums
• Hub with Drum
• EZ Lube
• ABS
• 25580 / 14125A
• Standard Grade
• For 5200 lbs Axles
• For 6000 lbs Axles
• For 7000 lbs Axles
• 8 on 6-1/2 Inch
• 16 Inch Wheel
• 16-1/2 Inch Wheel
• 17 Inch Wheel
• 17-1/2 Inch Wheel
• Dexter

Smooth and powerful hydraulic jacks upgrade your existing hydraulic setup to lift your heavy load with a press of a button. The selector valve safely controls movement while the pivoting foot pad stabilizes the jack on rough terrain.

• Trailer Jack
• Dump Trailer
• 5th Wheel Trailer
• Gooseneck Trailer
• Enclosed Trailer
• Side-Mount Jacks
• 10001 lbs or More
• Hydraulic Jack
• Weld-On
• With Rectangle Foot
• Dexter

Welded, power tilt deck kit makes loading and unloading vehicles easier without ramps. Includes hydraulic power unit, battery strap, cylinder assembly, hydraulic hoses, battery cables, supports, and safety signs.

• Dump Trailer Parts
• Lifting System
• Tilt Deck Kits
• Dexter Axle

Shuddering brakes, trailer sway, or grinding under load? Worn drums and bearings put safety at risk. An ABS-ready hub built for Dexter's Tow Assist restores smooth braking, steady tracking, and the peace of mind to tow without second-guessing.

• Trailer Hubs and Drums
• Hub with Drum
• EZ Lube
• ABS
• 25580 / 14125A
• Standard Grade
• For 7000 lbs Axles
• 8 on 6-1/2 Inch
• 16 Inch Wheel
• 16-1/2 Inch Wheel
• 17 Inch Wheel
• 17-1/2 Inch Wheel
• Dexter

Keep your horse safe and comfortable with this cushioned butt bar pad. The 2" thick foam absorbs impact, while the durable vinyl cover easily wipes clean.

• Horse Trailer Accessories
• Protectant Pads
• Butt Bar Pad
• 29 Inch Long
• Vinyl and Foam
• Redline

Upgrade to the Dexter Fortress oil cap kit for secure hub sealing and easy maintenance. Designed for 9K12K axles, this bolt-on cap includes gasket, plugs, and hardware, and works with both oil and grease lubrication systems.

• Trailer Bearings Races Seals Caps
• Caps
• Oil Cap
• 10000 lbs Axle
• 12000 lbs Axle
• 9000 lbs Axle
• Dexter

• Trailer Bearings Races Seals Caps
• Bearings
• Bearing Kits
• Standard Bearings
• 2.88 Inch I.D.
• Bearing 387A and 25580
• Race 382A and 25220
• 7200 lbs Axle
• 8000 lbs Axle
• Dexter

Kit includes left- and right-hand 10" x 2-1/4" hydraulic drum brakes. Free-backing design prevents drag when reversing. Corrosion-resistant build fits 3,500-lb axles with 13" to 15" wheels.

• Trailer Brakes
• Hydraulic Drum Brakes
• Marine Grade
• Free Backing
• 10 x 2-1/4 Inch Drum
• 3500 lbs Axle
• 13 Inch Wheel
• 14 Inch Wheel
• 15 Inch Wheel
• Dexter

Protect your trailer's bearings with these 2.446" OD grease caps. Zinc-plated steel resists corrosion, and the drive-in fit installs easily. Designed for 12" x 2" Dexter hubs with 4-, 5-, or 6-bolt patterns. Includes 2 caps.

• Trailer Bearings Races Seals Caps
• Caps
• Standard Grease Cap
• 2.44 Inch O.D.
• 5200 lbs Axle
• 6000 lbs Axle
• Dexter

Get a clean, factory look for your car when it's not being towed by using these invisible base plates. Tabs remain on tow bar arms and easily secure to base plate receivers with a quick turn. Simple, bolt-on installation with included hardware.

• Tow Bar Base Plate
• Removable Draw Bars
• Twist Lock Attachment
• Completely Hidden
• etrailer

Built for weekend getaways and daily demands, this custom hitch bolts on fast, tows up to 4,000 lbs, and features a matte black finish with a fourth layer of powder coat for strength, style, and corrosion resistance that lasts.

• Trailer Hitch
• Custom Fit Hitch
• Class III
• 600 lbs TW
• 4000 lbs GTW
• Concealed Cross Tube
• etrailer

Get your boat loaded and unloaded on to your trailer with this manual ratcheting winch. Zinc finish resists rust, making it ideal for marine use. Strap included.

• Trailer Winch
• Standard Hand Winch
• Boat Trailer Winch
• 1001 - 2000 lbs
• Ratcheting Hand Crank
• Single Speed Winch
• Polyester Strap
• etrailer

Hit the road with confidence! Whether towing a camper, hauling gear, or getting the job done, this hitch is built for adventure. A fourth layer of matte black powder coating resists corrosion, ensuring strength and durability for every journey.

• Trailer Hitch
• Custom Fit Hitch
• Class I
• 200 lbs TW
• 2000 lbs GTW
• Concealed Cross Tube
• etrailer

Hit the road with confidence! Whether towing a camper, hauling gear, or getting the job done, this hitch is built for adventure. A fourth layer of matte black powder coating resists corrosion, ensuring strength and durability for every journey.

• Trailer Hitch
• Custom Fit Hitch
• Class III
• 350 lbs TW
• 3500 lbs GTW
• 4000 lbs WD GTW
• 400 lbs WD TW
• No Cross Tube
• etrailer