New Arrivals

Mid-ship signals that stand out. This slim surface-mount marker handles bright turns and low-dim running, stays sealed against weather, and installs with a simple pigtail so your rig stays visible from the middle on long hauls.

• Trailer Lights
• Clearance Lights
• Side Marker
• Oval
• Surface Mount
• Submersible Lights
• 6-1/2L x 2-1/4W Inch
• Amber
• TecNiq

Quality LED lighting from trailers and trucks to marine and emergency gear. Easily installed, rugged and lifetime guaranteed for demanding use.

• Trailer Lights
• Interior Lights
• Round
• Surface Mount
• 4-1/2 Inch Diameter
• White
• TecNiq

From docking lights to work truck strobes, TecNiq offers high performance, value driven LED lighting built tough and backed for life.

• Trailer Lights
• Tail Lights
• Tail
• Backup
• Turn
• Stop
• Rectangle
• Surface Mount
• Submersible Lights
• 15-1/2L x 1-1/4W Inch
• Red
• TecNiq

LED lighting redefined sleek, IP68 sealed, rugged, lifetime warrantied fixtures for work trucks, emergency vehicles, marine use, trailers and more.

• Trailer Lights
• Reflectors
• Clearance Lights
• Side Marker
• Side Reflector
• Round
• Recessed Mount
• Submersible Lights
• 2-1/2 Inch Diameter
• Red
• TecNiq

Quality LED lighting from trailers and trucks to marine and emergency gear. Easily installed, rugged and lifetime guaranteed for demanding use.

• Trailer Lights
• Tail Lights
• Stop
• Turn
• Backup
• Tail
• Round
• Recessed Mount
• 4 Inch Diameter
• White
• Red
• TecNiq

Add a sleek and compliant red ID light to your trailer with this low-profile, surface-mount design. It installs with two screws and helps meet FMVSS 108 lighting standards.

• Trailer Lights
• Clearance Lights
• Rear Clearance
• ID Bar
• Surface Mount
• Submersible Lights
• 15-1/2L x 1-5/16W Inch
• Red
• TecNiq

On the job or on the road, this 6-inch grommet light handles warnings and signals in one slim package. IP68 sealed, sonically welded, and plug-and-play with an AMP plug, it keeps you compliant and visible in any weather.

• Trailer Lights
• Tail Lights
• Stop
• Backup
• Tail
• Turn
• Oval
• Recessed Mount
• Submersible Lights
• 6-1/2L x 2-1/4W Inch
• TecNiq

A compact, spring mounted dome light ideal for interior compartments in trailers, RVs, utility and emergency vehicles.

• Trailer Lights
• Interior Lights
• Round
• Surface Mount
• 4-1/2 Inch Diameter
• White
• TecNiq

Slim, right-side 7-function tail light that installs with standard bolts and a 12" pigtail. Sealed and submersible for ramps and storms, with bright LEDs and a tough lens to keep you seen mile after mile.

• Trailer Lights
• Tail Lights
• License Plate
• Side Marker
• Tail
• Rear Reflector
• Stop
• Turn
• Side Reflector
• Rectangle
• Surface Mount
• Non-Submersible Lights
• 6-1/2L x 3-1/2W Inch
• Red
• TecNiq

Dependable LED lighting that outperforms engineered, built in the USA, backed by lifetime warranty. From trailers to trucks to marine, its durable, bright, and ready for anything.

• Trailer Lights
• Utility Lights
• Rectangle
• Surface Mount
• Non-Submersible Lights
• 36L x 1-7/8W Inch
• Blue
• White
• TecNiq

If you're tired of ripping carpet off your old bunks, tearing out staples, and attaching new carpet, these 4' boards come ready to go. Traditional, marine carpeted bunks cushion your hull and give you controlled unloading at the ramp.

• Boat Trailer Parts
• Bunks
• Bunk Boards
• 2 Inch Tall
• 4 Inch Wide
• 48 Inch Long
• Tie Down

Don't let a blowout ruin your boating trip. This carrier keeps a pre-greased hub and your spare mounted together, so you're ready to swap them out and get to the water without missing a beat.

• Spare Tire Mount
• Frame Mount
• Bolt-On
• 5-Bolt
• Trailer
• Marine Grade Finish
• Tie Down

Carpeted bunks wear out and drag against your hull. Amber polyvinyl rollers trade that drag for a smooth, easy glide, even in shallow water. Made to last a lifetime, they resist sun and water without marking your boat.

• Boat Trailer Parts
• Rollers
• Bunks
• Roller Bunk
• 48 Inch Long
• Tie Down

If your straight trailer tongue takes up too much room in your garage or storage unit, this kit will help. Once installed, it lets your trailer fold back onto itself, freeing up to 6' of space.

• Folding Trailer Tongue
• Coupler Hinge Kit
• Bolt-On
• Swing King

Heavier pontoons need more contact to ride steady. This wide 6-3/16" galvanized bracket spreads the load across your bunks, keeping tubes square on rough hauls while resisting spray and saltwater season after season.

• Boat Trailer Parts
• Bunks
• Bunk Bracket
• 6-3/16 Inch Wide
• 15-11/16 Inch Long
• Tie Down

If your straight trailer tongue takes up too much room in your garage or storage unit, this kit will help. Once installed, it lets your trailer fold back onto itself, freeing up to 6' of space.

• Folding Trailer Tongue
• Coupler Hinge Kit
• Bolt-On
• Swing King

Rub marks, squeaks, or crooked loading? A swivel bolster adds a little pivot so the bunk sits flush to your hull. You set the height, it spreads the boat's contact, and you'll load your boat smoother while protecting it's finish.

• Boat Trailer Parts
• Bunks
• Bunk Bracket
• 1 Inch Tall
• 2-1/2 Inch Wide
• 10 Inch Long
• Tie Down

Guide your boat on straight every time. These 10" galvanized brackets secure side bunks that guide and steady your hull, with hot-dip protection against spray and saltwater.

• Boat Trailer Parts
• Bunks
• Bunk Bracket
• 1/4 Inch Tall
• 5 Inch Wide
• 10 Inch Long
• Tie Down

If your bunk brackets are rusted, bent, cracked, or no longer keeping your bunks aligned and tight, it's time for new ones. These will make sure your boat sits square, loads smoothly, and you're not risking hull damage or a failed support.

• Boat Trailer Parts
• Bunks
• Bunk Bracket
• 1 Inch Tall
• 2-1/2 Inch Wide
• 8 Inch Long
• Tie Down

A U-bolt carrier is a no-frills way to keep your spare on the trailer instead of in your truck. It's simple, secure, and reliable. Just clamp it onto your frame and your tire is ready when you need it, without the bulky hardware.

• Spare Tire Mount
• Frame Mount
• Bolt-On
• 5-Bolt
• 4-Bolt
• Trailer
• Marine Grade Finish
• Tie Down

Tired of dragging your boat on soggy carpet? Skip the bunk replacement with these Tie Down slicks. They bolt right over your carpeted bunks to create a smooth PVC surface, helping your boat slide on and off with less strain.

• Boat Trailer Parts
• Bunks
• Bunk Carpet
• Bunk Carpet Slides
• 1-3/4 Inch Wide
• 17 Inch Long
• Tie Down

If your straight trailer tongue takes up too much room in your garage or storage unit, this kit will help. Once installed, it lets your trailer fold back onto itself, freeing up to 6' of space.

• Folding Trailer Tongue
• Coupler Hinge Kit
• Bolt-On
• Swing King

Rub marks, squeaks, or crooked loading? This swivel top angle replaces the pivoting head on your bolster bracket, letting your bunk sit flush to the hull. Pair it with an upright bracket to complete your setup.

• Boat Trailer Parts
• Bunks
• Bunk Bracket
• 1-1/2 Inch Tall
• 1-7/8 Inch Wide
• 3-1/2 Inch Long
• Tie Down

No room on your trailer tongue for a spare tire? This angled carrier tucks your spare out of the way until you need it. The pivot swings the tire down so you can swap it out and get back on the road in no time.

• Spare Tire Mount
• Frame Mount
• Bolt-On
• 5-Bolt
• 6-Bolt
• 4-Bolt
• Trailer
• Marine Grade Finish
• Tie Down