New Arrivals

This flow gate assembly lets you control the material rate on Base Line salt spreaders, helping reduce waste and match the flow to the material used.

• Accessories and Parts
• Salt Spreaders
• Flow Gate Assembly
• Meyer

The Blaster salt spreader controller gives you fingertip control and handy automatic features. Back-lit controls make nighttime use easy. The system shuts down if the motor stops, and the fuses are simple to replace.

• Accessories and Parts
• Salt Spreaders
• Controllers
• Meyer

This salt auger kit helps break up chunks and prevent clumping. It's designed for your Blaster salt spreader (37000 and 39010 - sold separately).

• Accessories and Parts
• Salt Spreaders
• Auger Parts
• Meyer

This fine material brush auger kit helps break up chunks and prevent clumping. It's designed for your Blaster salt spreader (37000 and 39010 - sold separately).

• Accessories and Parts
• Salt Spreaders
• Auger Parts
• Meyer

This screen for Blaster salt spreaders (37000 and 39010 - sold separately) helps break up clumps, keeping the auger safe and your spreader working efficiently.

• Accessories and Parts
• Salt Spreaders
• Hopper Screen
• Meyer

This 1/2 motor is designed for your Blaster salt spreader (37000 and 39010 - sold separately).

• Accessories and Parts
• Salt Spreaders
• Motors
• Meyer

This tailgate controller for Meyer Base Line salt spreaders (sold separately) is easy to use, with buttons, a digital speed display, and optional vibrator compatibility.

• Accessories and Parts
• Salt Spreaders
• Controllers
• Meyer

This auger vibrator kit for your Blaster salt spreader (37000 and 39010 - sold separately) helps you spread a 50/50 blend of rock salt and sand. It includes the extended auger, vibrator, mounting plate, baffle plate, and harness.

• Accessories and Parts
• Salt Spreaders
• Auger Parts
• Meyer

This auger vibrator kit keeps rock salt flowing smoothly in your Base Line salt spreader (31100 and 36100 - sold separately). The kit includes the vibrator and harness.

• Accessories and Parts
• Salt Spreaders
• Auger Parts
• Meyer

Replaces the gear shaft for your Kwikee Revolution powered RV entry steps.

• Accessories and Parts
• RV Steps
• Gears
• Kwikee

All it takes is one worn brake to throw your trailer off. Replacing a single ABS brake assembly restores smoother stopping and steadier tracking, so you stay in control on steep grades, in crosswinds, and during sudden traffic stops.

• Accessories and Parts
• Trailer Brakes
• Electric Drum Brakes
• RH
• 5200 - 7000 lbs
• Brake Assembly
• 12 x 2 Inch Drum
• Lippert

Replace a cracked or faded switch bezel on your Power Gear leveling system with this black/silver trim piece. Snaps in easily for a quick cosmetic fix. Works on select Power Gear RV leveling system control panels.

• Accessories and Parts
• Camper Jacks
• Trailer Jack
• Controllers
• Control Panel
• Bezel
• Lippert

Replace your RV's old or damaged awning roller and fabric with this heavy-duty assembly. Fits Edge and 2000 series 8' power awnings with a built-in LED strip. Installs more easily than replacing just the fabric.

• Accessories and Parts
• RV Awnings
• Fabric
• 8 Feet Wide
• Extends 7 Feet
• Black Fade
• Lippert

A damaged harness can make your RV's leveling system unreliable. This 25' replacement restores electrical connections, helping your jacks work smoothly. Designed for Lippert Level-Up systems, it's a simple fix to get you back to camping.

• Accessories and Parts
• Camper Jacks
• Trailer Jack
• Wiring Harness
• Lippert

Wish you had a quick way to swap out your batteries? Well, you do now. Easily slide this tray out of your RV so you can monitor, replace, or disconnect your batteries without wasting time rooting around a cluttered or cramped cargo compartment.

• Accessories and Parts
• Battery Boxes
• Battery Trays
• Lippert

Restore your Solera Edge slide-out awning with this full idler side replacement kit. Designed for all Solera Edge toppers, it includes black-finished hardware and wire support components for a secure, like-new installation.

• Accessories and Parts
• RV Awning
• Hardware
• Lippert

Replaces the electric steps, motor, and control unit for your Kwikee 47 Series RV step. Motor and control unit automatically extend and retract the steps when you open and close the door. Wiring pigtail hardwires to your RV's power.

• Accessories and Parts
• RV Steps
• Motors
• Control Module
• Steps
• Lippert

Replace lost or damaged hardware for your MaxxAir MaxxFan Deluxe roof vent fan. Designed for a perfect fit with all MaxxAir MaxxFan Deluxe models.

• Accessories and Parts
• RV Vents and Fans
• Hardware
• MAXXAIR

Replaces the lid spring for your MAXXAIR MaxxFan Deluxe RV roof vent. Works with all MaxxFan Deluxe RV roof vents.

• Accessories and Parts
• RV Vents and Fans
• Hardware
• Springs
• MAXXAIR

We curated this kit so you can recover a stuck vehicle from almost any distance. There is less risk of injury or gear damage since the ropes and shackles are made from a tough synthetic material that's stronger than steel and safer to use.

• Accessories and Parts
• Tow Straps and Recovery Straps
• Recovery Kit
• Standard Loops
• Extra Heavy Duty
• Maxtrax

Replace a missing or damaged lift knob on your MaxxFan Plus roof vent so you can still open or close the dome when power is out. 3-wing design gives you a solid grip and installs in seconds to keep fresh air flowing.

• Accessories and Parts
• RV Vents and Fans
• Roof Vent
• Operator Parts
• Knob
• MAXXAIR

COMING SOON! This winch assist for the Jack-E and Jack-It Pro carrier makes loading and unloading of heavy e-bikes virtually effortless. The hand crank operated winch can lift up to 160 lbs.

• Accessories and Parts
• RV and Camper Bike Racks
• Hitch Bike Racks
• Winch Assist
• Jack-It
• Lets Go Aero

COMING SOON! Easily move your Jack-It Original or Jack-It PLUS bike rack from the trailer A-frame to your vehicle hitch. Detach the V-Wing carrier section and mount it to the adapter on any motorized vehicle for convenient bike transport.

• Accessories and Parts
• RV and Camper Bike Racks
• Shanks and Adapters
• Hitch Shank
• Jack-It
• Lets Go Aero

COMING SOON! The Bump-It receiver adaptor transforms the Jack-It Pro and Jack-It TwinSpin trailer A-frame mounted bike rack models into a mobile solution for the vehicle hitch.

• Accessories and Parts
• RV and Camper Bike Racks
• Shanks and Adapters
• Hitch Shank
• Jack-It
• Lets Go Aero