New Arrivals

These co-branded Kuat/Diode Dynamics covers feature a durable, rubberized design that fits securely over each DEK light pod, protecting them from damage while keeping you compliant with road regulations.

• Accessories and Parts
• Roof Rack
• Lights
• Lens
• Kuat

Replaces the gear shaft for your Kwikee Revolution powered RV entry steps.

• Accessories and Parts
• RV Steps
• Gears
• Kwikee

Take your rukRak cargo basket on the move by installing this handy wagon accessory. Simply detach your basket from the carrier frame and use the convenient grab handle to get your gear rolling. Pneumatic balloon wheels cover any terrain.

• Modular Hitch Rack
• Accessories and Parts
• rucRack Cargo Carrier
• Accessory Only
• Wagon Add-On
• rucRak

When your RVibrake 3 or 4 hits the brakes, it needs something solid to push against. The Curt Phantom Stop Plate Bracket installs in minutes, fits most vehicles, and keeps your system working reliably every trip.

• Accessories and Parts
• Flat Tow Brake System
• Hardware
• Brackets
• CURT

The 12-Volt Battery Direct Kit provides an extra 12-Volt outlet that runs directly off of your towed vehicle's battery. The inline 20-amp fuse and 16 gauge wire provides consistent power when your stock 12-Volt outlet cannot.

• Accessories and Parts
• Flat Tow Wiring Harness
• Battery Charge Line Kit
• CURT

Not every dash is made for mounts. The Curt RVi Bean Bag Dash Mount gives your Command Center tablet a stable, magnetic base that works anywhereso you always have the view you need.

• Accessories and Parts
• Flat Tow Brake System
• Brake Monitoring
• Electronic Device Holder
• CURT

Storing anything in the bay of your RV is a dirty business. Keep your RVibrake system looking brand new with the Roadie Soft Shell Case. The durable and light material will stand up against the rigors of the road.

• Accessories and Parts
• Flat Tow Brake System
• Storage Bag
• CURT

Stay in control behind the wheel. The Curt RVi Bullseye Wireless Monitor gives you real-time braking data, instant alerts, and a manual brake button so you can respond with confidence on any road.

• Accessories and Parts
• Flat Tow Brake System
• Brake Monitoring
• CURT

Tired of coming back to a dead battery after towing? The Curt RVi Battery Disconnect cuts power at the source, preventing drain and keeping your vehicle ready to drive.

• Accessories and Parts
• Flat Tow Wiring Harness
• Battery Disconnect
• CURT

Battery drain can sneak up on you when flat towing. The Curt RVi Battery Charger+ keeps your towed vehicle's battery charged, shows real-time status with LEDs, and saves you from dead-battery surprises.

• Accessories and Parts
• Flat Tow Brake System
• Battery Charge Line Kit
• CURT

Skip drilling and wiring with the Breakaway Wireless Adapter. It links your RVibrake 3 or 4 to the breakaway switch wirelessly, giving instant alerts and LED feedback for safer, simpler towing.

• Accessories and Parts
• Flat Tow Brake System
• Breakaway Kit
• Wireless Adapter
• CURT

The Breakaway System for RVibrake provides maximum safety and convenience. It is designed to quickly activate your RVibrake braking system in an emergency situation and takes less than an hour to install.

• Accessories and Parts
• Flat Tow Brake System
• Breakaway Kit
• CURT

This kit is designed to eliminate interference of the axle breather and the Pacbrake air spring support bracket on 2019 and newer Ram 3500 Cab&Chassis vehicles.

• Accessories and Parts
• Vehicle Suspension
• Axle Breather
• Relocation Kit
• Pacbrake

Need a replacement tank for your Pacbrake setup? This 1/2-gallon carbon steel tank is powder coated, corrosion-resistant, and built to ASME specs—ready to store air for your suspension or accessories.

• Accessories and Parts
• Tire Inflator
• Vehicle Suspension
• On Board Air Compressor
• Air Tank
• Pacbrake

Replaces one air bag for your Pacbrake Alpha HD air suspension kit. Includes one large double convoluted air bag with aluminum end caps.

• Accessories and Parts
• Vehicle Suspension
• Springs
• Air Spring
• Alpha HD
• Pacbrake

Universal mounting bracket for use with HP625 Series compressors.

• Accessories and Parts
• Vehicle Suspension
• On Board Air Compressor
• Air Bag Compressor Kit
• Tire Inflator
• Mounting Hardware
• Brackets
• Pacbrake

Need to reposition the rear height sensor on your air suspension setup? These passenger side relocation brackets are designed for use with HP10402 air spring kits and make sure everything stays aligned and working as it should.

• Accessories and Parts
• Vehicle Suspension
• Mounting Hardware
• Brackets
• Pacbrake

You just hooked up the trailer and the truck's not level. Climbing in and out of the cab to adjust your air bags isn't cutting it. This wireless controller gives you full control from where you stand—no matter what springs you use.

• Accessories and Parts
• Air Bag Compressor Kit
• Smartphone App
• Single Path
• Dual Path
• Smartphone Display
• Heavy Duty
• Pacbrake

Looking for simple, in-cab control of your air springs? This basic paddle valve kit connects to your existing air system and lets you inflate or deflate each spring independently with dual switches and a built-in mechanical gauge.

• Air Bag Compressor Kit
• Accessories and Parts
• In-Cab Gauge
• Dual Path
• Analog Display
• Heavy Duty
• Pacbrake

Waiting on your compressor to catch up? Add this 1/2 gallon tank to store air and speed up your system. You'll get quicker response from your air springs or tools, plus fewer compressor cycles and smoother control when it counts.

• Accessories and Parts
• Tire Inflator
• Vehicle Suspension
• Air Bag Compressor Kit
• On Board Air Compressor
• Air Tank
• Pacbrake

You just hooked up the trailer and the truck's not level. Climbing in and out of the cab to adjust your air bags isn't cutting it. This wireless controller gives you full control from where you stand—no matter what springs you use.

• Accessories and Parts
• Air Bag Compressor Kit
• Smartphone App
• Dual Path
• Single Path
• Smartphone Display
• Pacbrake

Replaces one air bag for your Pacbrake Alpha HD Pro air suspension kit. Includes one single convoluted air bag with internal jounces and aluminum end caps

• Accessories and Parts
• Vehicle Suspension
• Springs
• Air Spring
• Alpha HD
• Pacbrake

This pressure switch is rated for 105 - 135 psi and is required when adding an air tank any of Pacbrake's Paddle Valve In-Cab Control Kits. A pressure switch rated for 85 - 105 psi (HP10111) is sold seperately.

• Accessories and Parts
• Air Bag Compressor Kit
• Vehicle Suspension
• On Board Air Compressor
• Switches
• Pacbrake

Replaces the HP425 Series air compressor for you Pacbrake onboard air system or air suspension system. This 12V unit has a chrome finish and comes with installation hardware.

• Accessories and Parts
• Tire Inflator
• Air Bag Compressor Kit
• Vehicle Suspension
• On Board Air Compressor
• Air Compressor
• Pacbrake