New Arrivals

Think of it as a one-time project that pays off on every trip. Once the Shadow 2 braking system is installed under the hood, you hook up, check your monitor, and drive away with the peace of mind that your towed vehicle is stopping safely behind you.

• Flat Tow Brake System
• Brake Systems
• Proportional System
• One-Time Setup
• Vehicle Battery
• Fixed System
• Air Over Hydraulic Brakes
• Air Brakes
• Hydraulic Brakes
• Wireless Display
• CURT

Replaces the heavy-duty L-pins and clips from your Curt TruTrack 2P trunnion weight distribution system with integrated active sway control (17355) or support brackets (17517, 17518, and 17519).

• Accessories and Parts
• Weight Distribution Hitch
• Pins and Clips
• CURT

Replaces the spring bar for your Curt TruTrack 4P trailer-mounted weight distribution system (17520).

• Accessories and Parts
• Weight Distribution Hitch
• Spring Bars
• Square Bar
• CURT

Replace a damaged or worn spring bar on your Curt TruTrack 2P system with this forged steel bar. Designed for 5,000-lb to 8,000-lb setups only (17599). Restores sway control and load leveling for safer, more stable towing.

• Accessories and Parts
• Weight Distribution Hitch
• Spring Bars
• Sqaure Bar
• CURT

Install your Curt electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your controller and then plug the other end into the built-in port beneath your vehicle's dash.

• Accessories and Parts
• Trailer Brake Controller
• Wiring Adapter
• Plugs into Brake Controller
• Vehicle Specific
• CURT

For heavy-duty applications that require cable, this steel winch cable has a break strength of 4,200 lbs and a working load limit of 1,400 lbs.

• Accessories and Parts
• Electric Winch
• Trailer Winch
• Cables and Straps
• 3/16 Inch Diameter
• 4200 lbs
• Wire Rope
• CURT

Replaces the mounting hardware for your Curt 70129 tow bar base plate. Restores secure fit on Jeep Gladiator JT.

• Accessories and Parts
• Tow Bar Base Plate
• Hardware
• CURT

Replace the ball on your Curt TruTrack 2P hitch with this 2-5/16" steel ball. Made for 5,000-lb to 8,000-lb systems only (17599), it bolts to the head and matches your system's capacity for safe, stable towing.

• Accessories and Parts
• Weight Distribution Hitch
• Balls
• CURT

Replace a lost or damaged bracket or install one in a second vehicle to easily transfer your Curt NEXT brake controller. The low-profile design installs above or below the dash and includes multiple mounting options for a secure, unobtrusive fit.

• Accessories and Parts
• Trailer Brake Controller
• Mounting Hardware
• Brackets
• CURT

For heavy-duty applications that require cable, this steel winch cable has a break strength of 5,600 lbs and a working load limit of 1,865 lbs.

• Accessories and Parts
• Electric Winch
• Trailer Winch
• Cables and Straps
• 7/32 Inch Diameter
• 5600 lbs
• Wire Rope
• CURT

For heavy-duty applications, this strap has a break strength of 4,800 lbs and a working load limit of 1,600 lbs.

• Accessories and Parts
• Trailer Winch
• Cables and Straps
• 22-3/8 Inch Wide
• 1600 lbs
• Straps
• CURT

Install your Curt electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port beneath your driver's seat.

• Accessories and Parts
• Trailer Brake Controller
• Wiring Adapter
• Plugs into Brake Controller
• Vehicle Specific
• CURT

Restore your Curt TruTrack 2P hitch with this direct replacement head. Built to fit 5,000-lb to 8,000-lb systems only (17599), it keeps your setup towing straight with integrated sway control right where you need it.

• Accessories and Parts
• Weight Distribution Hitch
• Head
• CURT

Replace the lost or damaged center pin for your Curt PowerRide fifth-wheel trailer hitch. Pin secures the 5th wheel head to the hitch body.

• Accessories and Parts
• 5th Wheel Hitch
• Pins and Clips
• CURT

Replaces the short bed bracket for your Curt OEM puck system gooseneck ball kit (C60668 or C60663). Compatible with 2023-2025 GMC Sierra and Chevrolet Silverado trucks with 6.5' short beds.

• Accessories and Parts
• Trailer Hitch Ball
• Mounting Hardware
• Brackets
• CURT

Install your Curt electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port beneath your vehicle's dash.

• Accessories and Parts
• Trailer Brake Controller
• Wiring Adapter
• Plugs into Brake Controller
• Vehicle Specific
• CURT

When your RVibrake 3 or 4 hits the brakes, it needs something solid to push against. The Curt Phantom Stop Plate Bracket installs in minutes, fits most vehicles, and keeps your system working reliably every trip.

• Accessories and Parts
• Flat Tow Brake System
• Hardware
• Brackets
• CURT

The 12-Volt Battery Direct Kit provides an extra 12-Volt outlet that runs directly off of your towed vehicle's battery. The inline 20-amp fuse and 16 gauge wire provides consistent power when your stock 12-Volt outlet cannot.

• Accessories and Parts
• Flat Tow Wiring Harness
• Battery Charge Line Kit
• CURT

Not every dash is made for mounts. The Curt RVi Bean Bag Dash Mount gives your Command Center tablet a stable, magnetic base that works anywhereso you always have the view you need.

• Accessories and Parts
• Flat Tow Brake System
• Brake Monitoring
• Electronic Device Holder
• CURT

Storing anything in the bay of your RV is a dirty business. Keep your RVibrake system looking brand new with the Roadie Soft Shell Case. The durable and light material will stand up against the rigors of the road.

• Accessories and Parts
• Flat Tow Brake System
• Storage Bag
• CURT

Stay in control behind the wheel. The Curt RVi Bullseye Wireless Monitor gives you real-time braking data, instant alerts, and a manual brake button so you can respond with confidence on any road.

• Accessories and Parts
• Flat Tow Brake System
• Brake Monitoring
• CURT

Tired of coming back to a dead battery after towing? The Curt RVi Battery Disconnect cuts power at the source, preventing drain and keeping your vehicle ready to drive.

• Accessories and Parts
• Flat Tow Wiring Harness
• Battery Disconnect
• CURT

Battery drain can sneak up on you when flat towing. The Curt RVi Battery Charger+ keeps your towed vehicle's battery charged, shows real-time status with LEDs, and saves you from dead-battery surprises.

• Accessories and Parts
• Flat Tow Brake System
• Battery Charge Line Kit
• CURT

Skip drilling and wiring with the Breakaway Wireless Adapter. It links your RVibrake 3 or 4 to the breakaway switch wirelessly, giving instant alerts and LED feedback for safer, simpler towing.

• Accessories and Parts
• Flat Tow Brake System
• Breakaway Kit
• Wireless Adapter
• CURT